Operation Manual

On/Off switch (4)

Infinitely variable speed control is possible with the

On/Off switch. The further you press the switch, the

higher the speed of the battery-powered

drill/screwdriver.

Selecting drill or hammer mode (7)

For normal drilling, turn the front set-collar to the

“drill” symbol. For drilling with hammer action, turn

the front set-collar to the “hammer” symbol and the

set-collar for torque adjustment to the “drill” symbol.

Screwdriving

We recommend using self-centering screws (e.g.

Torx screws, recessed head screws) designed for

reliable working. Be sure to use a bit that matches

the screw in shape and size. Set the torque, as

described elsewhere in these operating instructions,

to suit the size of screw.

Technical data

Voltage supply 18 V =

Speed 0-550 rpm

Torque 17 levels

Forward and reverse rotation yes

Chuck diameter 1 - 10 mm

Battery charging voltage 18 V =

Battery charging current 2,5 A

Mains voltage for charger 230 V ~ 50 Hz

Sound pressure level LPA: 69,9 dB(A)

Sound power level LWA: 80,9 dB(A)

Vibration a

–

< 2,5 m/s

Weight 1,6 kg

Ordering replacement parts

Please quote the following data when ordering

replacement parts:

앬 Type of machine

앬 Article number of the machine

앬 Identification number of the machine

앬 Replacement part number of the part required

For our latest prices and information please go to

www.isc-gmbh.info

Anleitung BAS 18 S SPK 1 21.12.2005 7:50 Uhr Seite 5