Anleitung BT-TS 800_SPK1:_ 25.09.2007 Bedienungsanleitung Tischkreissäge Operating Instructions Bench-Type Circular Saw Mode dʼemploi Scie circulaire à table de menuisier Istruzioni per lʼuso della Sega circolare da banco.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 2 Vor Inbetriebnahme Bedienungsanleitung und Sicherheitshinweise lesen und beachten Read and follow the operating instructions and safety information before using for the first time. Avant la mise en service, lisez le mode dʼemploi et les consignes de sécurité et respectez-les. Prima della messa in esercizio leggete e osservate le istruzioni per lʼuso e le avvertenze di sicurezza.
Anleitung BT-TS 800_SPK1:_ 1 25.09.
Anleitung BT-TS 800_SPK1:_ 25.09.
Anleitung BT-TS 800_SPK1:_ 10 25.09.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 10 GB Important! When using equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating manual with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, give them these operating instructions as well.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 11 GB Noise emission values 앬 6. Before putting the machine into operation The sawʼs noise is measured in accordance with DIN EN ISO 3744; 11/95, E DIN EN 31201; 6/93, ISO 7960 Annex A; 2/95. The machine may exceed 85 dB(A) at the workplace. In this case, noise protection measures need to be introduced for the user (ear-muffs).
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 12 GB time after changing the saw blade. 8.3 Adjusting the angle (Fig. 9/10) Slacken the star-grip screws (14). You can now adjust the blade (4) to the required angle (see scale (13)) by sliding the two star-grip screws (14). 앬 Re-tighten the star-grip screws (14). 앬 7.3 Fitting the saw blade guard (Fig. 4) 앬 Mount the saw blade guard (2) on the splitter (5) and align.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 13 GB Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. We recommend that you clean the device immediately each time you have finished using it. Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. 10.
Anleitung BT-TS 800_SPK1:_ 25.09.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 47 k Nur für EU-Länder Werfen Sie Elektrowerkzeuge nicht in den Hausmüll! Gemäß europäischer Richtlinie 2002/96/EG über Elektro- und Elektronik-Altgeräte und Umsetzung in nationales Recht müssen verbrauchte Elektrowerkzeuge getrennt gesammelt werden und einer umweltgerechten Wiederverwertung zugeführt werden.
Anleitung BT-TS 800_SPK1:_ 25.09.2007 9:09 Uhr Seite 54 t GUARANTEE CERTIFICATE Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. Of course, if you would prefer to call us then we are also happy to offer our assistance under the service number printed below.
