Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 1 Operating Instructions Drag, Cross-Cut and Mitre Box Saw Art.-Nr.: 43.006.91 I.-Nr.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 2 14:39 Uhr 3 1 10 29.03.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 8 29.03.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 5 GB 1. Description (Fig. 1/2) 1. Release lever 2. Handle 3. On/Off switch 4. Machine head 5. Saw blade 6. Saw blade guard, hinged 7. Stop rail 8. Turntable 9. Base plate, fixed 10. Locking handle 11. Pointer 12. Dial for turntable 13. Locking lever 14. Knurled screw 15. Scale 16. Retaining pin Attention: Saw blade is not included! 2.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 6 GB 6 Do not leave the saw in the rain and never use it in damp or wet conditions. Provide good lighting. Never saw near combustible liquids or gases. Wear suitable work clothes! Loose garments or jewellery may become caught up in the rotating saw blade. Operators have to be at least 18 years of age.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 7 GB balance at all times. Check the tool for signs of damage! Before you carry on using the tool it is imperative to check that its safety devices and any slightly damaged parts are working properly and in the way intended. Check that the moving parts work properly and do not jam or whether any of the parts are damaged.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 8 GB 5.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 9 GB screw (21) until the angle between the blade (5) and the turntable (8) equals 90°. Retighten the counternut to secure this setting. Finally, check the position of the angle indicator. If necessary, release the pointer with a crosstip screwdriver, move to the 0° position of the angle scale (15) and retighten the holding screw. 7.4 Making 90° crosscuts with turntable at 0° 45° (Fig.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 GB 7.10 Storage compartment for spare saw blade (Fig. 13) The saw is equipped with a storage compartment (33) for a spare saw blade. To open the storage compartment, pull the locking knob (34) on the rear of the saw while pulling the storage compartment out at the same time. 7.11 Laser function (Fig. 12) You can switch the laser ON and OFF with the switch (a). The laser (35) directs a beam onto the workpiece.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 11 t GUARANTEE CERTIFICATE Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. Of course, if you would prefer to call us then we are also happy to offer our assistance under the service number printed below.
Anleitung KGSZZ 4300_SPK7:Anleitung KGSZ 3050 SPK1 29.03.2007 14:39 Uhr Seite 12 DISTRIBUTOR & A/S CENTER in Korea : Kubo-Tech, Inc. D Block Room No. 35-310, Guro Machinery & Tools Shopping Center 604-1, Guro-dong, Guro-gu, Seoul 152-050 Korea Tel : 02-2675-0942/0943 Fax : 02-2675-0944 e-Mail : smakorea@yahoo.co.kr The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH.