Use and Care Manual

- 6 -

Danger! - Read the operating instructions to reduce the risk of injury

Caution! Wear ear-muﬀ s. The impact of noise can cause damage to hearing.

Caution! Wear safety goggles. Sparks generated during work or splinters, chips and dust emitted by

the equipment can cause loss of sight.

Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on

wood and other materials. Never use the tool to work on any materials containing asbestos!

Store the batteries only in dry rooms with an ambient temperature of 50°F to 104°F (+10°C to +40°C).

Place only fully charged batteries in storage (charged at least 40%).

104°F

(+40°C)

50°F

(+10°C)

Select between the individual functions only when the equipment is at a standstill. If you fail to observe

this point, the equipment may be damaged.

Turn and push the SDS-Plus drill bit into the tool chuck as far as it will go. The tool will lock automatically.

1. Pull back and hold the locking sleeve!

2. Remove the tool!

Anl_TE_HD_18_Li_SPK7_USA.indb 6Anl_TE_HD_18_Li_SPK7_USA.indb 6 23.04.2019 11:14:2423.04.2019 11:14:24