TE-CD 12/1 Li-i GB Original operating instructions Cordless Impact Drill 7 Art.-Nr.: 42.572.37 Anl_TE_CD_12_1_Li_i_SPK7.indb 1 I.-Nr.: 11029 21.11.
1 1 11 7 2 9 3 10 8 4 5 6 2 3 1. 6 5 8 5 2. -2- Anl_TE_CD_12_1_Li_i_SPK7.indb 2 21.11.
4 5 1 11 2 3 4 7 1 6 7 a 9 a 2 -3- Anl_TE_CD_12_1_Li_i_SPK7.indb 3 21.11.
-4- Anl_TE_CD_12_1_Li_i_SPK7.indb 4 21.11.
GB Table of contents 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Safety regulations Layout and items supplied Proper use Technical data Before using the equipment Operation Cleaning, maintenance and ordering spare parts Disposal and recycling Storage Charger indicator -5- Anl_TE_CD_12_1_Li_i_SPK7.indb 5 21.11.
GB Danger! - Read the operating instructions to reduce the risk of injury Caution! Wear ear-muffs. The impact of noise can cause damage to hearing. Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on wood and other materials. Never use the device to work on any materials containing asbestos! Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the device can cause loss of sight.
GB Danger! When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well.
GB 4. Technical data The specified vibration value was established in accordance with a standardized testing method. It may change according to how the electric equipment is used and may exceed the specified value in exceptional circumstances. Motor power supply: ............................... 12 V DC Idling speed: ............................0-400/0-1400 rpm Torque settings: ...................................... 20+1+1 Clockwise/counter-clockwise: ........................
GB switched on but operates without load). 6.2 Torque setting (Fig. 4/Item 1) 5. Before using the equipment Caution! Only ever adjust the setting ring when the equipment is at a standstill. The cordless screwdriver is fitted with a mechanical torque selector. Be sure to read the following information before you put the cordless screwdriver into operation: 1. Charge the battery pack with the charger supplied. 2.
GB 6.5 On/Off switch (Fig. 5/Item 4) Infinitely variable speed control is possible with the On/Off switch. The further you push the switch, the higher the speed of the cordless screwdriver. 6.6 Switching from speed 1 to speed 2 (Fig. 4/Item 7) You can work with a higher or lower speed depending on the position of the selector switch. Change the gear only when the drill is at a standstill. If you fail to observe this point, the gearing may be damaged. 6.7 Battery capacity indicator (Fig.
GB 8. Disposal and recycling The equipment is supplied in packaging to prevent it from being damaged in transit. The raw materials in this packaging can be reused or recycled. The equipment and its accessories are made of various types of material, such as metal and plastic. Never place defective equipment in your household refuse. The equipment should be taken to a suitable collection center for proper disposal.
GB 10. Charger indicator Indicator status Red LED Green LED Explanations and actions Off Flashing Ready for use The charger is connected to the mains and is ready for use; there is no battery pack in the charger On Off Charging The charger is charging the battery pack in quick charge mode. Off On The battery is charged and ready for use. Action: Take the battery pack out of the charger. Disconnect the charger from the mains supply.
GB For EU countries only Never place any electric power tools in your household refuse. To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and its implementation in national laws, old electric power tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
GB Service information We have competent service partners in all countries named on the guarantee certificate whose contact details can also be found on the guarantee certificate. These partners will help you with all service requests such as repairs, spare and wearing part orders or the purchase of consumables. Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables.
GB Warranty certificate Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the service number shown. Please note the following terms under which guarantee claims can be made: 1. These guarantee terms apply to consumers only, i.e.
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar D erklärt folgende Konformität gemäß EU-Richtlinie und Normen für Artikel GB explains the following conformity according to EU directives and norms for the following product F déclare la conformité suivante selon la directive CE et les normes concernant l’article I dichiara la seguente conformità secondo la direttiva UE e le norme per l’articolo NL verklaart de volgende overeenstemming conform EU richtlijn en normen voor het product E declara la siguiente con
- 17 - Anl_TE_CD_12_1_Li_i_SPK7.indb 17 21.11.
- 18 - Anl_TE_CD_12_1_Li_i_SPK7.indb 18 21.11.
- 19 - Anl_TE_CD_12_1_Li_i_SPK7.indb 19 21.11.
EH 11/2019 (01) Anl_TE_CD_12_1_Li_i_SPK7.indb 20 21.11.
