User Manual

Next: Install the receiver (if one isn't already installed).
- END –
Installing the MeetingPad Manager receiver
An InterWrite system incorporating one MenuPads must have a MeetingPad Manager receiver. If
your system doesn't have a MeetingPad Manager receiver (available separately), install one now:
1. Turn off the computer and disconnect the keyboard.
2. Using the Y-cable provided with the receiver, connect the receiver and the keyboard to
the computer (as shown here).
3. If your system includes and InterWrite MeetingBoard or DrawingBoard Interactive,
connect it to the receiver with a 9-pin serial cable.
4. If your facility has other MenuPad Manager receivers, set the rotary switch to a number
different from the other receivers.
5. Place the receiver in an appropriate location. For best operation it should be:
Away from metal objects.
Directly visible (line of sight) from the MenuPads in the same room.
6. Turn on the computer.
Tip: The LED on the receiver lights when data is passing through.
Next: Install InterWrite software.
- END –
Installing InterWrite software
1. Remove any graphic tablet drivers installed on the PC.
2. Insert the InterWrite MenuPad CD-ROM into the computer’s CD-ROM drive.
3. Wait for the installation program to launch.