User Manual

Welcome Page 17 of 54
file://C:\TEMP\~hhA856.htm 8/12/02
To write, draw or interact with the system, press the pen's tip on the MeetingPad's surface, then move the pen across the surface.
About the pen buttons:
Color Copyboard Mode
Copyboard Mode is MeetingBoard’s simplest mode of operation. When using Copyboard Mode, the tablet acts as an electronic dry-erase
board---information written on the MeetingBoard tablet is captured as an electronic image, which can be printed on a color ink jet printer.
Tip: To start Color Copyboard Mode, see Starting from MeetingBoard. It's always good to clear the buffer (press Clear twice)
before starting to use Color Copyboard Mode. This assures that you are starting with a blank "page."
Note: Color Copyboard Mode is not available on the MeetingBoard LX.
Note: MeetingBoard does not store files in Copyboard Mode.
About School Suite
School Suite is a set of electronic tools that make collaboration in classrooms efficient and simple. Products in the School Suite family
include:
n SchoolBoard: a versatile electronic whiteboard.
n SchoolPad 100: an electronic tablet, which communicates with a School Suite system through a serial port or USB port.
n SchoolPad 300: a cordless electronic tablet, which communicates with a School Suite system though a Bluetooth wireless networking
hub.
n InterWrite Software: a Windows-based program for electronic collaboration. InterWrite tools include:
l Interactive Mode: Operate and annotate any application, then save and e-mail the results. Used with SchoolBoard and a video
projector.
l PC Whiteboard Mode: Write on a MeetingBoard using electronically-enhanced dry erase marker pens, then save, print and e-mail
the images. Used with a MeetingBoard or MeetingBoard LX.
l InterWrite Reader: View files created by InterWrite in Interactive Mode or PC Whiteboard Mode.
Also available: InterWrite Meeting Services, that enable users to log into and hold meetings that anyone in the world with an Internet
connection can participate in.
A Tip (same as pressing mouse's left button)
B Left-double-click (same as pressing mouse's left button twice)
C Right-click (same as pressing mouse's right button)
To do this... Do this...
Write or draw 1. Remove cap from electronic pen, exposing the dry-erase marker tip.
2. Write or draw on the MeetingBoard writing surface.
Erase... both marker ink and corresponding parts of the electronic image: Use the
large eraser, or use the small eraser on the back of the pen.
Erase...
electronic image only: On the MeetingBoard control panel, press the Clear
button twice. This will not erase the marker ink. Erase the marker ink with a
standard eraser or cloth.
Print an image
On the MeetingBoard control panel, press the Print button.
The image will print on the attached printer. You can continue
writing/drawing on the MeetingBoard while the image is being printed. The
print buffer can store up to three pages for printing. Note: If the image
doesn't print, see Troubleshooting.