Manualshelf

User Manual

ManualsBrandseInstruction ManualsElectronicsMeetingPad 300
21222324252627282930
Welcome Page 28 of 54
file://C:\TEMP\~hhA856.htm 8/12/02
*Requires SchoolPad 300 and Bluetooth hub.
Write meeting notes on a
"blank page"
ü ü
Review, rearrange or delete
annotation images
ü ü
Distribute annotation images
electronically
ü ü
Print notes Optional Optional
Starting from SchoolBoard
1. Assure the SchoolBoard is on.
2. Assure other components are on:
n For Interactive Mode or PC Whiteboard Mode: Assure the computer is on.
n For Interactive Mode: Assure the video projector is on and is projecting the computer's screen onto the SchoolBoard writing
surface.
3. On the SchoolBoardcontrol panel, use the electronic pen to...
Starting from a SchoolPad
Starting from a SchoolPad 100
1. Assure the SchoolBoard is on.
2. Assure the computer is on.
3. Using the pen, click the LAUNCH InterWrite spot in the upper right corner of the SchoolPad 100 tablet.
4. Choose a user profile:
a. Using the pen, click the e (in "InterWrite") in the upper left corner of the SchoolPad 100 tablet.
b. Click Yes in the dialog window, then select a user profile and log in.
Starting from a SchoolPad 300
Note:
n Up to 7 SchoolPad 300s can communicate with one Bluetooth hub.
n Each SchoolPad 300 must be within 25 feet (7m) of its intended Bluetooth hub. Reception depends on local conditions, and
performance may vary in your facility.
1. Assure the SchoolBoard is on.
2. Assure the computer is on.
3. Press the ON button on the SchoolPad 300. The discovery process will only find units that are on.
4. Using the computer's mouse, click the InterWrite icon in the Task Bar, then click Device Manager in the pop-up menu.
5. In the Bluetooth Device Discovery window, click the Discover Devices button. A list of found devices will appear.
6. For each device associated with the hub in this system, select the desired action for the device.
7. On the back of the SchoolPad 300, find the unit's address. In the Bluetooth Device Discovery window, open the list of found
devices, then click the corresponding device address.
Click A for Interactive Mode.
Click B for PC Whiteboard Mode.