User Manual

Welcome Page 30 of 54
file://C:\TEMP\~hhA856.htm 8/12/02
n Pen tip is the same as a mouse's left button. Use it to click and drag.
n Lower button (nearest the pen tip) is the same as a mouse's left button. Use it to click and drag.
n Upper button (farthest from the pen tip) is the same as a mouse's right button.
Sleep mode assures pens operate over the longest time. After 20 seconds of inactivity, a pen automatically enters sleep mode. This
enables its battery to provide several months of service.
Using SchoolPad pens
Note: SchoolPad functions are available only when using InterWrite Software's Interactive Mode.
To write, draw or interact with the system, press the pen's tip on the SchoolPad's surface, then move the pen across the surface.
About the pen buttons:
Guide to InterWrite Software
Interactive Mode
Here are a few basic topics to get you started:
n Learn the difference between Annotation Mode and Mouse Mode, as you will frequently switch from one to the other.
n Review annotation tools, so you'll know what capabilities are available.
n Calibrate MeetingBoard or SchoolBoard to assure the tablet is correctly aligned with the projected image.
n Create freehand or text annotations.
n Edit annotations and manage annotation pages.
For more information, see the topics under "InterWrite Software > Using Interactive Mode > How to..." in the Contents tab in the left
panel of this window.
or
Use the green buttons above to move through topics in sequence.
PC Whiteboard Mode
n How to use PC Whiteboard Mode.
n What the toolbar buttons do.
InterWrite Viewer
n How to use InterWrite Viewer.
n What the Viewer buttons do.
n How InterWrite names annotation files.
Annotation Mode versus Mouse Mode
Within Interactive Mode, there are two additional modes:
A Tip (same as pressing mouse's left button)
B Left-double-click (same as pressing mouse's left button twice)
C Right-click (same as pressing mouse's right button)