User Manual

Welcome Page 36 of 54

file://C:\TEMP\~hhA856.htm 8/12/02

n For a registered user:

1. Click the user's name in the Existing User Profiles list.

2. Click OK.

n For an unregistered user:

1. Click the Edit Profiles button.

2. In the Edit User Profiles window:

a. Type the new user's name.

b. Select a pointer identifier, default pen color and default line width for this user.

c. Click Add User to complete registration and return to the login window.

Note: User profiles set the default pen color and width, and enable users to be identified by different cursor shapes.

Note:

n Up to 7 MeetingPad 300s / SchoolPad 300s can communicate with one Bluetooth hub.

n Each MeetingPad 300 / SchoolPad 300 must be within 25 feet (7m) of its intended Bluetooth hub. Reception depends on

local conditions, and performance may vary in your facility.

1. Press the ON button on the MeetingPad 300 / SchoolPad 300. The discovery process will only find units that are on.

2. Using the computer's mouse, click the InterWrite icon in the Task Bar, then click Device Manager in the pop-up menu.

3. In the Bluetooth Device Discovery window, click the Discover Devices button. A list of found devices will appear.

4. For each device associated with the hub in this system, select the desired action for the device.

5. On the back of the MeetingPad 300 / SchoolPad 300, find the unit's address. In the Bluetooth Device Discovery window, open the

list of found devices, then click the corresponding device address.

Tip: To give a unit a unique name, select the unit in the list of found devices, then click the Properties button.

6. Press the MeetingPad/SchoolPad 300's LINK button, then:

n For a registered user:

1. Click the user's name in the Existing User Profiles list.

2. Click OK.

n For an unregistered user:

1. Click the Edit Profiles button.

2. In the Edit User Profiles window:

a. Type the new user's name.

b. Select a pointer identifier, default pen color and default line width for this user.

c. Click Add User to complete registration and return to the login window.

Note: User profiles set the default pen color and width, and enable users to be identified by different cursor shapes.

Tip: Once a MeetingPad 300 / SchoolPad 300 has been added via the Device Manager, it can be easily connected later from

the Session Manager (which reduces the number of steps needed to connect).

Use the Session Manager

The Session Manager enables you to control which devices can use InterWrite. Once a device has logged in, it can be easily connected

or disconnected using the Session Manager.

As shown here, the Session Manager lists each device---and its status---that has logged in to the system: