User Manual

Limited Warranty for Interwrite Response Receiver
Interwrite Learning
TM
warrants this product to be free from defects in material and workmanship
under the following terms. Complete and return the enclosed warranty registration card to ensure that
your products are covered by this warranty.
Coverage
Parts and labor are warranted for one (1) year from the date of the first consumer purchase for the
Interwrite Response Receiver.
Technical Support
Web-based Technical Support is available free of charge at: www.interwritelearning.com/support,
where current driver releases, as well as comprehensive technical support, troubleshooting, Technical
Bulletins and FAQs can be found.
Telephone Technical Support is available free of charge to the original consumer for a period of 90
days from the date of purchase of the product. Please contact our Technical Support Department:
In United States: [phone] (MST)
In Europe: [phone] (CET)
You can also fax your request to:
In United States: [phone] (MST)
In Europe: [phone] (CET)
Our toll-free number in the U.S. is: 800-856-0732 (MST)
To view the terms and conditions of the Limited Warranty for Interwrite Response Receivers in their
entirety, please visit our Web site at:
www.interwritelearning.com
Note: This equipment has been tested and found to comply with the limits of a Class B digital
device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee the interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
· Reorient or relocate the receiving antenna.
· Increase the separation between the equipment and the receiver.
· Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced Radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may
cause undesired operation.
Canada
Industry Canada Class B emission compliance statement. This Class B digital apparatus complies with
Canadian ICES-003.
Avis de conformité á la réglementation d’Industrie Canada. Cet appareil numérique de classe B est
conforme á la norme NMB-003 du Canada.
Regulatory Statements
Interwrite Response Receiver Declaration of Conformity
The “CE“ mark on this device indicates compliance under the EMC 89//336/EEC Directive.
Declaration of conformity according to ISO/IEC Guide 22 and EN 45014
Manufacturer’s Name: GTCO Corp (dba Interwrite Learning)
Manufacturer’s Address: 7125 Riverwood Drive
Columbia,MD 21046 U.S.A.
declares, that the product
Product Name: Interwrite Response Receiver Hub
Model Numbers: H2
Product Options: All
conforms to the following product specifications:
EMC: EMC Directive 89/336/EEC and amendment 92/31/EEC
Emissions Testing: EN 55022:2003 Class B
EN 55024:2003 and
Low Voltage Directive 73/23/EEC
Supplementary Information
The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC.
Scottsdale, Arizona, U.S.A. 6.1.2007 Dana Doubrava
Location Date Engineering Mgr
European Union Directives
European Union WEEE Directive
The manufacture of this equipment required the extraction and use of natural resources. It may
contain hazardous substances that could impact health and the environment.
• In order to avoid the dissemination of the hazardous substances into the environment
and to diminish the pressure on our natural resources, we encourage you to return
this product to the appropriate take-back system facility. These facilities reuse or
recycle most of the materials in this equipment in a responsible way.
• The crossed-out wheeled bin symbol at left invites you to use these take-back systems.
• If you need more information about the collection, reuse and recycling systems in
your area, please contact your local or regional waste authority.
• Further information about the responsible end-of-life management of this and other
Interwrite Learning products is available on our Web site at
www.interwritelearning.com.
Copyright© 2007 Interwrite Learning
TM
Interwrite Learning and Interwrite are trademarks of GTCO Corp.
All other products and company names are the trademarks or registered trademarks of their respective owners.
The information contained in this document is subject to change without notice. Interwrite Learning assumes no responsibility for technical, or editorial errors, or omissions that may appear in this document, or for the
use of this material. Nor does Interwrite Learning make any commitment to update the information contained in this document. This document contains proprietary information which is protected by copyright. All rights
reserved. No part of this document can be photocopied or reproduced in any form without the prior, written consent of Interwrite Learning.
Interwrite Learning
8224 East Evans Road
Scottsdale, AZ 85260
USA
Tel: [phone]
Support: 480.443.2214
Fax: [phone]
Interwrite Learning
7125 Riverwood Drive
Columbia, MD 21046
USA
Tel: [phone]
Fax: [phone]
Sales: 866.496.4949
Interwrite Learning
A Division of GTCO CalComp
GmbH
Kreiller Strasse 24
81673 Munich
Germany
Tel: + 49 (0) 89 370012-0
Fax: + 49 (0) 89 370012-12
This device complies with Part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may cause undesired
operation.
The radiated output power is far below the FCC Radio Frequency exposure limits. Nevertheless, this
device should be used in such a manner that the potential for human contact during normal operation
is minimized. This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions for satisfying
RF exposure compliance. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.
36-01337/37-01177-01 Rev. A
www.InterwriteLearning.com
Support: 480.443.2214
European Union Emission Directive
This product is in conformity with the protection requirements of EU Council Directive 89/366/ECC
on the approximation of the laws of the Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to CISPR 22/European Standard EN55022. The limits for Class B equipment
were derived for typical industrial environments to provide reasonable protection against interference
with licensed communication devices.