User's Manual

Table Of Contents

interface bridge 0

no shutdown

ip address 192.168.0.1

exit

interface wireless 0 bridge-group 0

interface FastEthernet 0 bridge-group 0

copy running-configuration startup-configuration

reboot

3.3. LibraPlus Point-to-Multipoint Quick Setup

This section explains how to conﬁgure a LibraPlus Master and Client radio for simple point to multipoint

communication. Using this example will conﬁgure a link without any additional features such as se-

curity, routing, ﬁltering, or VLAN

Note that the distance in this example is set to 300 for bench testing. When the units are deployed in

the ﬁeld, this value should be changed to the appropriate link distance.

• Default LibraPlus IP address 192.168.0.5

• Login to the unit using a SSH enabled utility such as Putty

• Default username: admin

• Default password: 123

3.3.1. CPE Unit

Use the following commands to conﬁgure the CPE side.

EION:

interface wireless 0

type station

ssid Eion

mode a

speed auto

channel 5805

tx-power 26 (use the maximum if field installation)

no rts

distance 300 (use the real distance if field installation)

wds-mode

fast-frame

polling

no burst

no compression

no wmm

no dfs

no atpc

no shutdown

exit

EION:

interface FastEthernet 0

ip address 192.168.0.5 255.255.255.0 (IP to be modified)

no shutdown

exit

Field Installation