User's Manual

Example 4.16. Dynamic WEP TTLS station (CPE)
EION: interface Wireless 0 type station (CPE)
Interface 'Wireless 0': type 'station'.
EION: interface Wireless 0 ssid Barney
Interface 'Wireless 0': SSID 'Barney'.
EION: interface Wireless 0 encryption wep
Interface 'Wireless 0': WEP enabled.
EION: interface Wireless 0 authentication ieee-802.1x
IEEE 802.1x enabled.
EION: interface Wireless 0 authentication ttls
EAP TTLS enabled.
EION: interface Wireless 0 authentication ca-cert thawte.crt
Using thawte.crt as CA certificate.
EION: interface Wireless 0 authentication identity jim
Using identity 'jim'.
EION: interface Wireless 0 authentication password wPldvork98
Password saved.
EION: interface Wireless 0 no shutdown
Interface 'Wireless 0' is up.
Command Summary
interface {name} {index} encryption wep
Description. Enable WEP encryption.
No-Form. Disable WEP encryption.
Arguments. No arguments.
Example.
EION: interface Wireless 1 encryption wep
Interface 'Wireless 1': WEP enabled.
EION: interface Wireless 1 encryption no wep
Interface 'Wireless 1': WEP disabled.
interface {name} {index} encryption key [key-index] [key]
Description. Set or select a WEP encryption key.
No-Form. Delete a WEP encryption key by index.
Arguments.
key-index
Specifies a WEP key index to be used for WEP encryption: from 1 to 4.
key
Specifies a key: 10 or 26 hex digits for 40 and 104 bit WEP key respect-
ively. The key argument may be omitted if it was specified previously.
49
Configuration