User's Manual

EION: interface Wireless 1 authentication no ieee-802.1x
IEEE 802.1x disabled.
interface {name} {index} authentication peap
Description. Enable PEAP. The command is applicable to both station (CPE) and access point
modes.
No-Form. Disable PEAP.
Arguments. No arguments.
Example.
EION: interface Wireless 1 authentication peap
PEAP enabled.
EION: interface Wireless 1 authentication no peap
PEAP disabled.
interface {name} {index} authentication md5
Description. Enable EAP-MD5. The command is applicable to the station (CPE) mode only.
EAP-MD5 can't be used as a stand-alone authentication with dynamic WEP, because it doesn't
support dynamic key exchange. However, it can be used as a phase 2 authentication method along
with PEAP, EAP-TLS and EAP-TTLS.
No-Form. Disable EAP-MD5.
Arguments. No arguments.
Example.
EION: interface Wireless 1 authentication md5
EAP MD5 enabled.
EION: interface Wireless 1 authentication no md5
EAP MD5 disabled.
interface {name} {index} authentication mschap-v2
Description. Enable EAP-MSCHAPv2. The command is applicable to the station (CPE) mode
only. EAP-MSCHAPv2 can't be used as a stand-alone authentication with dynamic WEP, because
it doesn't support dynamic key exchange. However, it can be used as a phase 2 authentication
method along with PEAP, EAP-TLS and EAP-TTLS.
No-Form. Disable EAP-MSCHAPv2
Arguments. No arguments.
Example.
EION: interface Wireless 1 authentication mschap-v2
EAP MSCHAPv2 enabled.
EION: interface Wireless 1 authentication no mschap-v2
EAP MSCHAPv2 disabled.
interface {name} {index} authentication tls
Description. Enable EAP-TLS. The command is applicable to the station (CPE) mode only.
A CA certificate, a client certificate and a private key are required for EAP-TLS.
No-Form. Disable EAP-TLS.
56
Configuration