User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
Figure 6:1 Mounting Bracket Unit Anchor
Figure 6:2 Attaching the Mounting Bracket Unit Anchor
6.4
I ntegrated Antenna Mounting
If you are mounting your LibraPlus and the unit has an integrated antenna, you will
have to consider the antenna’s polarization. When you later install the unit on the pole
or wall, you will need to install it so that the antenna’s polarization arrow is pointing as
shown in the examples below.
LibraPlus 5860 User Guide LibraPlus I nstallation: Integrated Antenna Mounting Page 29 of 95