User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
7 Configuration
The LibraPlus contains an integrated web based GUI that controls the operation and
conf iguration of the radio unit. I t is administered over an Ethernet connection using a
web-based GUI .
7.1
Accessing the GUI
To connect to the LibraPlus GUI do the following:
1. Configure the PC in the same subnet as the LibraPlus 5860
2. Open the web browser on the PC.
3. Type “http:/ / 192.168.1.44” in your web browser and press “Enter”
4. When prompted to login, type “admin” as the login, and “admin123” as the
password, and then click the on the “OK” button.
Figure 7:1 LibraPlus Login Prompt
NOTE: Default login information for the radio is:
IP address: 192.168.1.44
Username: admin
Password: admin123
LibraPlus 5860 User Guide Conf iguration: Accessing the GUI Page 43 of 95