User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
5. After successful login, the Master Home Page appears. You are now logged in
and may begin configuring the radio.
Figure 7:2 LibraPlus Master Home Page
7.2
Wireless
7.2.1 Wireless Settings
The wireless settings page conf igures the PHY operation of the radio. Depending on the
Device operational Mode selected, different options will appear in the Wireless Settings
page. For this reason it is recommended that this option is configured first.
Any change in the wireless settings requires a save and reboot in order for the changes
to be applied to the system. Once the “Apply” button is clicked, the system will ask for
the user conf irmation, I f the user presses “OK” then the conf iguration is saved and will
reboot automatically.
LibraPlus 5860 User Guide Conf iguration: Wireless Page 44 of 95