User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
delete any MAC entries from the list, then enter the corresponding list name
and MAC entry and then click “Delete” button.
6. In order for the new MAC address settings to take effect, the radio must be
rebooted.
Figure 7:17 MAC Access Lists
7.5.3.1
MAC Access List – Field Description
Field Name Description
MAC Access List Name This is the MAC Access List Name. This is the name
which would be added to the “Wireless Settings” to add
the “White” or “Black” list peers.
MAC Access List Entry This is the MAC entries added/ deleted to the list
7.5.4 Date and Time Settings
Procedure for Date and time settings
1. After logging into the LibraPlus 5860 Product, click the “+ ” sign near the
“System” at the left side of the page.
2. After pressing the “+ ” sign”, the “System” will expand showing “Date and Time
Conf ig”.
3. Now click on “Date and Time Conf ig”.
4. Displays the current time and date set in the product.
5. The user can change the Date in the “Date” box.
6. The user can change the Time in the “Time” box.
7. Once the Date and/ or Time are conf igured click the “Apply” button below to set
them. This setting will take effect immediately.
LibraPlus 5860 User Guide Conf iguration: System Page 59 of 95