User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
Figure 7:18 Date and Time Configuration
7.5.4.1
Date and Time Setting – Field Descriptions
Field Name Description
Date This is the Date that is currently set in the LibraPlus 5860 product.
Time This is the Time that is currently set in the LibraPlus 5860 product.
7.5.5 User Password Settings
This is the conf iguration procedure to change the Password for the current username of
the LibraPlus 5860 product.
1. After logging into the LibraPlus Product, click the “+ ” sign near the “System” at
the left side of the page.
2. After pressing the “+ ” sign, the “System” will expand showing “User Password”.
Now click on the “User Password”.
3. Type the new password in the “New Password” box for the current username.
4. Once the Password is modified click the “Apply” button below to set them. This
change will take effect immediately.
5. If there is any error, then re-enter the values once again.
Figure 7:19 Change Passw ord
7.5.5.1
User Password – Field Descriptions
Field Name Description
LibraPlus 5860 User Guide Conf iguration: System Page 60 of 95