User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
LibraPlus 5860 User Guide Configuration: SSH Access Page 61 of 95
Field Name Description
Current
Username
This is the current user name that is used in the LibraPlus 5860
product.
The default value is “admin”
Current
Password
This is the Current password for the user name that is used in
the LibraPlus 5860 product.
The default value is “admin123”
New Passw ord This is the new password for the current user name.
Re-Type New
Password
This field verifies that no typos were made entering the new
password.
7.6
SSH Access
SSH access to the LibraPlus is restricted for factory conf iguration only.