User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
8 Monitoring Status
The LibraPlus 5860 contains several screens in the GUI that display the current status
of the radio and the network. This is the procedure to check the status screens of the
LibraPlus 5860 product.
1. After logging into the LibraPlus 5860 Product, click the “+ ” sign near the
“Status” at the left side of the page.
2. After pressing the “+ ” sign”, the “Status” will expand showing the available
status screens.
Note: Some status screens will only be available on the “Master” side
of the link.
Status screens contain a “Clear” and a “Refresh” Button. The “Clear” button will clear
the counters of the Network Status. The “Refresh” button will check the updated
counters of the Network Status.
8.1
DHCP Leases
Note: DHCP Lease status is only available if the LibraPlus 5860 is
configured as a “Master”
Figure 8:1 DHCP Leases Status
LibraPlus 5860 User Guide Monitoring Status: DHCP Leases Page 63 of 95