User's Manual
Table Of Contents
- 1 Copyright Notice
- 2 Table of Contents
- 3 Preface
- 4 Product Description
- 5 Pre-installation
- 6 LibraPlus Installation
- 6.1 Connecting the Ethernet Cable
- 6.2 Mounting Conditions
- 6.3 External Antenna Mounting
- 6.4 Integrated Antenna Mounting
- 6.5 Pole-mounting the LibraPlus
- 6.6 Wall-mounting the LibraPlus Radio
- 6.7 Antenna Mounting Guidelines
- 6.8 Cabling the LibraPlus
- 6.9 Cabling up to the LibraPlus Radio
- 6.10 Weatherproofing Cable Connections
- 6.11 Installing a Drip Loop
- 6.12 Cabling to the Antenna
- 6.13 Connecting the Power/Ethernet to the LibraPlus
- 7 Configuration
- 8 Monitoring Status
- 9 Utilities
- 10 Appendix A: Troubleshooting
- 11 Appendix B: Definitions
- 12 Appendix C: 5 GHz US Channel Spacing
- 13 Appendix D: Integrated Antenna Specifications
9 Utilities
The LibraPlus 5860 contains several utilities that are useful for installation and
troubleshooting your wireless network. The Utilities are accessible via the
“Maintenance” and “Diagnostics” Menus.
9.1
Maintenance
9.1.1 Save Configuration
This utility will save the current running conf iguration of the LibraPlus 5860 radio.
Figure 9:1 Save Configuration
9.1.2 Factory Default
The Factory Default utility will restore all configurable settings to their factory default
conf igurations.
List of Factory Default Settings:
Field Name
Default Setting
MASTER
Default Setting
SLAVE
Wireless Settings
Device Operation Mode Master
Slave
Station I D (SSI D) target
target
Mode normal
normal
Channel 36
auto scan
Transmit Power 14 dBm
auto
Data Rate auto
auto
Wireless Transmission ON
ON
DFS Enable
Enable
Fast Frame Enable Enable
ATPC Disable Disable
WMM Enable Enable
MAC Access List Name None None
MAC Access List Mode None None
LibraPlus 5860 User Guide Utilities: Maintenance Page 67 of 95