User's Manual

Figure 9:2 Factory Defaults
NOTE: The LibraPlus unit must be rebooted for the factory default
settings to take effect.
9.1.3 Upgrade Firmw are
The f irmware of the LibraPlus 5860 radio can be upgraded via the GUI using the
following procedure. The f irmware upgrade procedure requires that the firmware
package is saved in the root folder of the FTP server.
1. After logging into the LibraPlus Product, click the “+ ” sign near the
“Maintenance” at the left side of the page.
2. After pressing the “+ ” sign”, “Maintenance” will expand showing “Upgrade
Firmware”.
3. Now click on “Upgrade Firmware”
4. Enter the FTP server details like I P address, username, password and the f ile
name. The FTP server must be accessible from the LibraPlus and conf igured in
the same subnet. The new f irmware package should be placed in the root
directory of the FTP server.
5. Select the “Upgrade” button to upgrade the f irmware. This conf iguration will
take effect immediately. While giving the f ilename enter the complete path to
the file.
6. If the file is downloaded from the FTP server and extracted correctly, Success
message string will be displayed otherwise Failure message will be displayed to
the user.
7. Reboot the LibraPlus 5860 for the new f irmware load to take effect.
Figure 9:3 Firmw are Upgrade Utility
LibraPlus 5860 User Guide Utilities: Maintenance Page 69 of 95