Manual

6F22 9V
G、To control the humidity carefully when you use the dehumidifier in the
place where have wood furniture and floor, because over-dry environment
may make the wood cracking.
H、Wildly shake, crash and high-angle incline may damage the machine:
like the noise becomes louder etc. And the high-angle incline may cause the
remained water of machine to leak out.
I. Replacement of battery
The battery needs to be replaced if LED is not displayed when the unit is not
on power.
a. Cut the power and unload the four bolts.
b. Take out the control panel, lightly pull electric cord.
c. Replace the battery with the specification of 6F22 9V.
d. Reinstate the machine, and connect to the power. It can preserve its
battery life if you turn on the machine as soon as replace it.
8
4. Element Introduction
Filter
Bolts for fixing the handle
Air inlet panel
Back panel
Front panel
Handle cover
Water pipe supporter
Wheels
Handle
Control panel
Power cord
Water outlet
NOTE: Please install the handle by yourself
(six bolts are for your installation)
5. Operation Panel:
Air outlet hood
3
Battery
1
2
3
4
5
1
2
3
4
5
ON/OFF
Up and Down
Display working time
Indicate the status
Humidity and Time showing
T
6
6
Purge by hand