Manual

Page 11 of 16
Drawing : - TPC383
Issue : - 3
Date : - 10/12/13
The problems as blow are probably not the real faults. Please check the
machine according to the tips.
PROBLEM CAUSE SOLUTION
Unit does not operate
No power is connected
to machine
Take down the plug
from the power; and
check the power
Unit is not turned on Press the key of “On”
to turn on the machine
E4 is exist Try to use manual
drainage
Unit collects little water
even no water
Not enough time for
working
Allow more time for
drying
Filter is blocked Clean the filter
Indoor temperature is
too low
The dehumidifying
volume is little under
low ambient
temperature
(≤18),thus try to
increase the indoor
temperature
Water pipe is tied or
deflated
Check water pipe
Poor dehumidification The door or windows
are open; the bad
hermetic house
Seal up the room
Leakage The inner water do not
drain clean or
overbank of the unit
Use manual drainage
after power is on
Hot air is drained from
the outlet
The normal heat
exchange
Normal phenomenon
With the sound of
water flow or da da
voice
The sound from
refrigerant flowing or
water pump working
Normal phenomenon
Notice: After check the above mentioned, if there is still a problem, please
contact with local distributor. Please do not tear down or mend the machine by
yourself.
Faults code: