Manual

Page 5 of 16
Drawing : - TPC383
Issue : - 3
Date : - 10/12/13
On/Off
Purge by hand
Display working time
Indicate the status
Time showing
ON/OFF:
Press once to turn the unit on or off.
PURGE:
Press the PURGE key to empty water from the pump reservoir. The pump will
stop automatically after forty seconds continuous operation. During normal
operation the pump purges automatically when the reservoir is full. And during
purge condition, if the bottom is pressed once again, the pump will stop
draining. Please press “PURGE” to make drainage before moving the machine
to avoid water spillage.
T: Display working hours and totally working time
After turning on operation, it can display working hours for the current time,
and the time unit is based on minutes, for example, if it displays “0000:50”, it
means that it has worked for 50 minutes this time. If you want to view the
totally working time, please press “T” once more, and it will shows for 10s and
returns automatically to the original working hours. If you press “T” before it
has lasted for 10s, it also can turn to the original working hours.
If the unit is in power but not in operation, LED will displays nothing, and in this
condition, the working hours at the last time will be showed for 10s if “T” is
pressed one time. But within 10s, if “T” is pressed again, the totally working
time will be showed for also 10s, and within 10s, if there is no action, LED will
automatically turn down. In addition, if “T” is pressed again when LED displays
the totally working time, LED will turn down immediately. What’s more, the
current working time will be deleted by pressing “T” for 5s continuously, and
the time will be recounted, but the deleted time will be added into the totally
working time.
Note: The totally working time can not be deleted, if the time is beyond the
range of LED showing time, it will be deleted and recount from the start.
6. Preparation before use