Brochure

Ebac Industrial Products Incorporated, 700 Thimble Shoals Blvd.
Suite109,NewportNews,VA23606-2575
Tel:(757)873-6800Fax:(757)873-3632www.ebacusa.com
the Problem
Excess humidity in your crawl space, warehouse, office factory or shop results in corrosion, mold growth and rotting.
Enormous costs are incurred every year through damage to inventory and through inflated building maintenance costs
as a result of dampness. Even if your building seems dry during the day, at night when the temperature falls the humidity
rises and the condensation process begins. The compact physical size, and high performance, makes the EIPL SPP6A
dehumidifier family the ideal choice for small spaces.
1. Air is drawn into the unit by a fan
2. Air passes over a cold surface
3. Astheairiscooled,it’smoisture
condenses
4. Water falls into the container
5. Airisre-heatedbytheheat
recovery system
6. Air passes back into room 2°C
warmer and considerably dryer
7. Defrost system automatically
de-icesunitasnecessary
8. Unit switches off automatically
when container is full
9. When the unit achieves the
selected level of dryness it
switches off automatically
FAN
MOIST
AIR
WARM
AIR
CONDENSER EVAPORATOR
WATER
COMPRESSOR
REFRIGERANT
CAPILLIARY
TUBE
HOW A DEHUMIDIFIER WORKS
Applications SPP6A
Model No. 1139800
Military Equipment Storage
4
Warehouse
4
Basements
4
Factories
4
Water Damage Restoration
4
Sports Halls
4
Storage Areas
4
Laboratories
4
Applications SPP6A
Model No. 1139800
Oil Rigs
4
Agriculture
4
Kitchens
4
Pumping Stations
4
Hotel / Motel
4
Stadiums
4
Ships / Barges
4
the DehumiDifier
EIPL dehumidifiers are effective solutions to environmental control problems. The EIPL range of units are high
capacity dehumidifiers, made to operate at high efficiencies by removing moisture from the air through the
refrigeration process. The fan draws the moist air through the cold evaporator coil, which cools the air below its
dew point. Moisture forms on the evaporator coil and is collected in the condensate tray, which is equipped
with an internal condensate pump for easy removal of collected moisture.
The cooled air then passes through the hot condenser coil where it is
reheated using the same energy removed during the cooling phase, plus
the additional heat generated by the compressor. The air is, therefore,
discharged from the dehumidifier at a slightly higher temperature with a
lower absolute humidity than that which entered. Continuous circulation of
air through the dehumidifier gradually reduces the relative humidity within
the area. Because the CD ranges of units are equipped with an internal
humidistat, they automatically switch on and off to save energy and expense
by maintaining the desired level of humidity with intermittent operation.
The additional features of the SPP6A make the unit the ideal choice for
installations where remote monitoring is required. The remote indicator
panel can be mounted outside the equipment being dried, therefore allowing
monitoing, without having to disturb drying process