Operation Manual

Key Sequence Display

Increase/decrease in the signal volume: The LED will

flash to indicate the desired change in volume.

Increase/decrease in bass/treble levels: The

LED will flash to indicate the desired change in the

bass/treble levels.

Mute: the unit becomes silent (mute activated)

Loudness: It reinforces the bass level in terms of the signal volume, assuming a

greater backing at a lower volume and a lesser backing at a higher volume.

Mono/stereo reception: When activated, this feature allows the FM stations to be received in

stereo. When cleared, this feature only allows for mono reception.

Note: If the control unit's configuration is mono (see Installation Sheet supplied with this kit), the

signal will always be received in mono even if the signal received by the antenna is in stereo.

If the control unit is off, a brief press on the will gradually turn on the unit

(between 1 and 2 seconds).

When the control unit is off, the LED will be OFF.

ON/OFF key

The LED will display the word “ON”

ENG

3. Operating Audio Functions

vol 58

BAS+06

MUTE

LD on

STEREO

PGR ON/OFFPRG ON/OFF

BASS/

TREBLE

BASS/

TREBLE

BASS/

TREBLE

BASS/

TREBLE

LOUD

MUTEMUTEMUTEMUTE

M/ST