Installation manual

It is possible to activate the “do not disturb” function on a Control Unit to
disallow the receipt of any kind of calls.When this function is activated, the
talk/auto response process becomes
talk only as it is no longer possible to
receive intercom calls. See 4.1.3.H.
Intercom Call Permissions.
The option to delete all the Control Unit’s internal FM tuner pre-
sets.
Key Sequences
Display Visual
PRG
2
abc
off
on
4.1.7.C. FM Search Sensitivity
4.1.7.D. Deleting FM Tuning Pre-sets
Store
66
Key Sequences
Display Visual
PRG
2
abc
fm SENSITIVITY
sens 4
sens 2
PRG
1
3
def
2
abc
PRG
3
def
4.1.7.F. “Do not disturb” function
Actiivate
Store
Key Sequences
Display Visual
PRG
2
abc
DO NOT DISTURB
on
off
PRG
1
4
ghi
4.1.7.E. Storing Station Frequencies Automatically
Key Sequences
Display Visual
PRG
2
abc
off
AUTOSCAN
on
PRG
3
def
3
def
When this function is activated, the talk/auto response process
becomes talk only as it is no longer possible to receive intercom
calls. See 4.1.3.H. Intercom Call Permissions.
The option to adjust the automatic station search sensitivity for the
Control Unit’s internal FM tuner.
To adjust the new
sensitivity; 4=max,
1=min.
delete
fm memory
To confirm the command
to delete the data.
To initiate the process.
The Control Unit will store into memory the stations that are received with the
highest quality, ordered from lowest frequency (87.5 MHz) to highest
frequency (108.0 MHz). The system will use all the memory slots available,
reaching the maximum of 20.
To confirm the command
Enter code
Enter code
Enter code
To initiate the process
CC-1023ENG-10