Installation manual
16
EIS
5
The 426A2 Control Unit has three program menus of settings at different access levels.
Discusses the settings related to the proper operation of the system. These settings should be programmed by a
professional.
Discusses each user’s custom operation mode. None of these settings will affect the system’s operation and, once defined, the
settings will usually not have to be changed.
Discusses features that are programmable by the user and which are easily changed.
Installation Menu:
Settings Menu:
Program Menu:
«
«
«
The program menus are structured in level and sub-level menus.. The
following operations and keys in the menu will scroll the user between
settings of the list of options.
When a setting to be programmed appears on the
display, it will be flashing, indicating it is ready to
be programmed.
If more than one setting is available (for example,
days of the week or digits of a date) use the +/-
keys to scroll forward/back.
The numeric keys can be used to change
a setting. In some cases, in addition
to the numeric keys, the +/- keys can also be used
to change settings
How to use this manual
Quick Access To A Menu Option
As an alternative to scrolling through the menus to find an option, directly key in the option code followed by the menu access key (see code list in
chapter 1. Quick Reference Guide
Once you select the desired setting, press the PRG key to store.
The entry will begin to flash quickly, indicating that the new setting has been
stored.
To delete an entry at any time, press the ZERO key for 1”
To exit a programming option without storing a setting, press the ON/OFF key.
PRG
0
C
1’’
Scroll back to the previous
option within the same level.
enter the level
exit the level
Scroll forward to the next
option within the same level.
21
54
8
7
0
C
3
6
9
abc
jkl
ghi
pqrs
tuv
def
mno
wxyz
CC-1122ENG-05