Important Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site: http://www.eizo.
[Location of Caution Statement] Ex. CG243W Product specifications may vary with sales areas. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com Copyright© 2009 EIZO NANAO CORPORATION All rights reserved.
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. ● LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part of a cloth with water to enhance its cleaning power.
CONTENTS Cover . ............................................................ 1 Chapter 3 Setting Monitor................................. 25 Notice for this monitor.............................................. 3 3-1. Enabling/Disabling Mode Selection [Mode Preset].................................................. 25 CONTENTS.............................................................. 5 3-2. Locking Buttons [Key Lock]......................... 25 Chapter 1 Introduction.............................
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • • • • • 22” wide format LCD (CG223W) / 24” wide format LCD (CG243W) Wide color gamut of 95% of Adobe RGB (CG223W) / 98% (CG243W) Resolution 1680 dots x 1050 lines (CG223W) / 1920 dots x 1200 lines (CG243W) HDCP (High-bandwidth Digital Content Interface) Frame Synchronous mode supported : 47.5 - 61Hz (CG223W) : 23.75 - 30.5Hz, 47.
1-2. Controls and Functions Ex. CG243W 16 POWER INPUT Disply-Port DVI-1 DVI-2 19 18 17 Adjustment menu 1 2 1 2 3 4 5 6 7 9 10 11 12 13 14 15 3 button Detects ambient brightness. Auto EcoView function Switches input signals for display when more than two PCs are connected to the monitor. Allows you to switch the Color Mode. 4 button Displays the information about monitor or input signals.
1-3. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to "Readme. txt" or the "read me" file on the disk for software startup procedures or file access procedures. Item Overview For For Windows Macintosh A “Readme.
1- 4. Basic Operation and Functions Basic operation of Adjustment menu 1 Displaying Adjustment Menu Press . The adjustment menu appears. Menu title Item Current mode Settings Menu 2 3 Adjusting/Setting 1. Choose a menu to adjust/set with , and press . 2. Choose an item to adjust/set with , and press . 3. Adjust/set the selected item with , and press . Exiting Press a few times. The adjustment menu finishes.
Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with "Portrait" position, the button guide appears next to the button.) NOTE • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status. • In CAL mode, although Button Guide are displayed above the and buttons, the brightness cannot be adjusted.
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Color Item Adjusting/Setting “2-3. Color Adjustment” (page 18) Brightness Contrast Temperature Gamma Advanced Settings Hue Saturation Outline Enhancer Gain Black Level 6 Colors Screen Color Reset “3-8. Restoring the Default Setting” (page 28) Screen Size “2-4. Displaying Lower Resolutions” (page 24) “2-2.
Chapter 2 Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input Resolution 640×480 720×400 800×600 1024×768 1024×768 1024×768 1152×864 1280×960 1280×1024 1600×1200 1680×1050*1 1680×1050*1 1920×1200*2 Applicable signal VGA VGA TEXT VESA VESA VESA VESA VESA VESA VESA VESA VESA CVT VESA CVT RB VESA CVT RB Frequency 60Hz 70Hz 60Hz 60Hz ~ 75Hz 85Hz 75Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz Dot Clock 170MHz (Max.
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the "Screen Resolution" dialog, select the monitor . 4. Click "Resolution" to select the desired resolution. 5. Click the [OK] button. 6.
2-2. Displaying Screen Correctly Digital Input When digital signals are input, images are displayed correctly based on the preset data of the monitor. When performing advanced adjustment, see “2-3 Color Adjustment” (page 18) and subsequent pages. Analog Input Attention • Wait 30 minutes or more from monitor power on before starting adjustments. (Allow the monitor to warm up for at least 30 minutes before making adjustments.
2 Prepare the display pattern for the analog display adjustment. Windows 1. Load the “EIZO LCD Utility Disk” to your PC. 2. Start the “Screen Adjustment Utility” from the startup menu. If it cannot be started, open the screen adjustment pattern files. Other than Windows Download the "Screen adjustment pattern files" from our site: http://www.eizo.com NOTE • For details and instructions on opening the “Screen adjustment pattern files”, refer to “Readme.txt” file.
4 Perform advanced adjustments for the following using the menu of the . Adjust the clock, phase and position, in this order. ● To eliminate vertical bars [Clock] Procedure 1. Choose from the menu, and press 2. Adjust the clock with or . Press 3. Press . slowly so as not to miss the adjustment point. to exit the adjustment.
5 Adjust the color gradation. ● To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment pattern files. 2. Choose from the menu, and press . The color gradation is adjusted automatically. When the auto adjustment is completed, a message appears.
2-3. Color Adjustment ● To select the display mode (Color Mode) Color Mode allows you to select easily the adequate mode suitable for the monitor’s application. Color Mode Mode 1-Custom Purpose Available for the color settings according to your preference. 2-sRGB Suitable for color matching with sRGB compatible peripherals. 3-EBU Suitable for reproducing the color gamut and gamma as set forth by EBU (European Broadcasting Union) standards.
● To perform advanced adjustments The menu of the Adjustment menu allows you to set and save the independent color adjustment for each mode. Attention • Wait 30 minutes or more from monitor power on before starting the color adjustment. (Allow the monitor to warm up for at least 30 minutes before making adjustments.) • Perform the range adjustment first when adjusting color for analog input signals. (Refer to “To adjust color gradation automatically” on page 17).
● To adjust the brightness [Brightness] The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press . Choose from the menu, and press . Adjust the brightness with or . Press to exit the adjustment. NOTE • You can also adjust the brightness using and .
● To adjust the gamma value [Gamma] The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of the monitor is called as “Gamma correction”. Adjustable range: 1.8-2.6 Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press Choose from the menu, and press Adjust the gamma value with or .
● To enhance the outline of the image [Outline Enhancer] OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels composing the images. This may improve the texture of the material and its feel of the images. On the contrary, it also functions to reproduce the images smoothly by gradating its outline. Procedure 1. 2. 3. 4. 5. Choose from the Adjustment menu, and press . Choose from the menu, and press .
● To adjust six colors [6 Colors] The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue. Adjustable range: -100 to 100 Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press . Choose from the menu, and press . Choose <6 Colors>, and press . Choose the color for adjustment among , , , , , or , and press . 5. Select or , and press . 6.
2-4. Displaying Lower Resolutions ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using from menu. Menu Full (default setting) Enlarged Normal Function Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Displays an image in full screen.
Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection [Mode Preset] Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure 1. 2. 3. 4. 5. Choose from the Adjustment menu, and press . Choose from the menu, and press . Select the mode to change its settings with or , and press Select “On” or “Off” with or . Press to exit the adjustment. .
3-3. Setting the EIZO Logo Display [Logo] The EIZO logo appears on the display when turning on the monitor. This function allows you to display, or not, the EIZO logo. Procedure 1. Press 2. Press to turn off the monitor. holding down at least 2 seconds to turn on the monitor. The Optional Settings menu appears. 3. 4. 5. 6. Choose from the menu, and press Select “On” or “Off” with or , and press . Select “Finish” with or . Press to exit the Optional Settings. .
3-5. Setting Language [Language] This function allows you to select a language for the adjustment menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese Procedure 1. 2. 3. 4. Choose
3-7. Setting the Display Position of the Adjustment Menu [Menu Position] Adjust the menu position using the following procedure. Procedure 1. Choose
from the Adjustment menu, and press . 2. Choose from the menu, and press 3. Select a menu position with or . 4. Press to exit the adjustment. . 3-8. Restoring the Default Setting There are two types of Reset.Chapter 4 Power Saving Function 4-1. Setting the Power Saving [Power Save] This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor enters the power saving mode, no image is displayed on the screen. Attention • Turning off the main power switch or unplugging the power cord completely shuts off power supply to the monitor.
4-2. Setting Power Indicator [Power Indicator] The brightness of the power indicator (blue) when the screen is displayed can be adjusted (default setting is set to light up when power is turned on, and brightness is set to 4). Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press . Choose from the menu, and press . Select the indicator brightness “Off” or in the range from 1 to 7 with or Press to exit the adjustment. as desired. 4-3.
Chapter 5 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • • • • 1. No-picture problems → See No.1 - No.2. Imaging problems (digital input) → See No.3 - No.8. Imaging problems (analog input) → See No.3 - No.12. Other problems → See No.13 - No.16. Problems No picture • Power indicator does not light. Possible cause and remedy • Check whether the power cord is connected correctly.
4. Problems Characters are blurred • 5. Afterimages appear • • • 6. 8. Green/red/blue/white dots or defective dots remain on the screen. Interference patterns or pressure marks remain on the screen. Noise appears on the screen. 9. Display position is incorrect. 7. • Possible cause and remedy Check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor.
Problems 16. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. • • • • • • Possible cause and remedy Check whether the USB cable is connected correctly. (page 37) Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer. (Refer to the manual of the PC for details.) Reboot the PC.
Chapter 6 Reference 6-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Attention • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. - Clearance between the screw holes: 100 mm × 100 mm - Thickness of plate: 2.
6-2. Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on the back of the monitor.
● To set input signal selection [Input Selection] The monitor recognizes the connector through which PC signals are input. Priority setting Auto Function When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. Manual The monitor detects only the PC’s signals currently displaying automatically. Select an active input signal with . Procedure 1. Choose from the Adjustment menu, and press . 2.
6-3. Making Use of USB (Universal Serial Bus) This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices. ● Required System Environment 1. A PC equipped with a USB port or another USB hub connected to a USB compatible PC 2. Windows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later 3.
6-4. Displaying Monitor Information ● Displaying monitor information by pressing The displays the information about the monitor and the current input signals displayed. (Example) ● Displaying signal information [Signal Info] This function displays the information about the current input signals displayed. 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . The Signal Info screen appears.
6-5. Specifications CG223W LCD Panel Size 22.0-inch (560 mm) TFT color LCD Surface treatment Anti-Glare Hard Coating Surface hardness 3H Viewing angle Viewing angle : Horizontal 178°, Vertical 178° (CR:10 or more) Dot Pitch 0.282 mm Response Time Approx. 12ms Horizontal Scan Analog Frequency Digital 24-82 kHz Vertical Scan Frequency Analog 47.5-86 Hz (1280 × 1024: ~ 76 Hz, 1680 × 1050: ~ 61 Hz) Digital 47.5-61 Hz (VGA TEXT: 69-71 Hz) Frame Synchronous mode 31-65 kHz Analog 47.
Movable range Environmental Conditions USB Tilt 30° Up, 0° Down Swivel 172° Right, 172° Left Adjustable height 225 mm (8.9 inch) (174 mm (6.9 inch) when Tilt is 0°) Rotation 90° (clockwise) Temperature Operating temperature: 0 °C - 35 °C (32 °F - 95 °F) Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F) Humidity Operating humidity: 20% - 80% R.H. (no condensation) Storage humidity: 10% - 80% R.H.
Analog Input Signal (Sync) Separate, TTL, positive/ negative Composite, TTL, positive/ negative Analog Input Signal (Video) Analog, Positive (0.7Vp-p/75Ω) Digital Signal (DVI) Transmission System TMDS (Single Link) Max. Video Signal Memory 45 (preset: 9) Analog Plug & Play Dimensions Mass Movable range Environmental Conditions USB Analog / Digital (DVI-I) : VESA DDC 2B / EDID structure 1.3 Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4 Main unit 566 mm (22.
Outside Dimensions CG223W Unit: mm (inch) 42 Chapter 6 Reference
Outside Dimensions CG243W Unit: mm (inch) Chapter 6 Reference 43
Connector Pin Assignment • DVI-I connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No. 1 2 3 4 5 C1 C2 C3 C4 C5 Signal T.M.D.S. Data 2T.M.D.S. Data 2+ T.M.D.S. Data2/4 Shield NC* NC* Pin No. 11 12 13 14 15 Signal 6 7 8 9 DDC Clock (SCL) DDC Data (SDA) Analog Vertical Sync T.M.D.S. Data1- 16 17 18 19 T.M.D.S. Data1/3 Shield NC* NC* +5V Power Ground (return for +5V, Hsync, and Vsync) Hot Plug Detect T.M.D.S. Data0T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield 10 T.M.D.S.
6-6. Glossary Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment. If the clock pulse is not set correctly, some vertical bars appear on the screen. DisplayPort VESA provides the digital interface standard for the digital display device.
HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable to HDCP system.
6-7. Preset Timing The following table shows factory preset video timing (for analog signal only). Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment.
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: ColorEdge CG223W / CG243W is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 •有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六 价 铬多 溴 联 苯多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 ×: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 ) 51