Datasheet

Simple and Precise Calibration
with ColorNavigator 6 Software
ColorNavigator 6 Basic Functions ColorNavigator 6 Advanced Functions
ColorNavigator 6 software makes calibration both simple and quick. Just input target
values for brightness, white point, and gamma to create an ICC profile within minutes.
ColorNavigator 6 is bundled with the CG and CX series and optional for the CS
series.
Calibrate to Preset or
User-Assigned Values
See How Other Devices Display Color
with Media Emulation
Calibrate to the White of Your Paper or
Brightness of Your Light Box
Preset values for web
contents, photography, and
printing are available. Just
select one, click "Adjust",
and ColorNavigator 6 will
begin calibrating. This takes
the guesswork out of assigning values for users with limited
color management knowledge. Experienced users can assign
the desired values for brightness, white point, and gamma and
then calibrate.
ColorNavigator 6* emulates
the color characteristics of other
media devices such as tablets,
smart phones, notebook PCs,
and other LCD/CRT monitors.
With a spectrophotometer,
ColorNavigator 6 reads the
emulated device's color patches
as they appear in a web browser and creates an ICC profile. By
using this profile with a ColorEdge monitor, content creators see
how their customers view color on their respective devices.
*Media emulation is available with ColorEdge CG monitors
only.
By measuring the white of
the paper to be used for
printing with an external
sensor, ColorNavigator 6
automatically sets the target
values for brightness and
white point accordingly. You
can also measure your light
box's* brightness and set it as the target value for calibration
to ensure uniform brightness between your monitor and light
box when color proofing.
*Currently supports JUST Color Communicator 1 and 2 only.
Post-Calibration Color Adjustment
Import / Export Adjustment Targets
Calibrate Your Monitor to Another Prole
Switch Your Proles as Needed
Recalibration Reminder
Prole Validation
Color Matching with Other Monitors
If you need to further fine-tune your color after calibrating,
ColorNavigator 6 lets you adjust hue and saturation for all six
primary and secondary colors (R,G,B,C,M,Y) as well as white
point, brightness, black level and gamma.
Import and export your post-adjustment target profiles and
share the same target values in multiple usage environments.
If you want to conduct color management between monitors
in a workflow ColorNavigator 6 lets you load the profile of
another ColorEdge monitor and use it to calibrate your own.
Change the target profile even when ColorNavigator 6 is not
activated. A list of profiles are always instantly accessible.
Choose one and it will be applied to your monitor's settings.
A monitor needs to be recalibrated at regular intervals
to maintain color accuracy. ColorNavigator 6 includes a
recalibration reminder that will appear after a certain number
of user-determined hours. You can also be reminded without
starting up ColorNavigator 6 by an LED on the monitor's front
panel that lights up.
To verify calibration results or check to see how much the
monitor's colors have varied since it was last calibrated,
ColorNavigator 6 measures the monitor's color patches to
determine the difference between the Delta-E value of the
monitor's profile and the actual displayed values of the monitor.
CG series validates RGB and CMYK values. CX and CS series
validate RGB values only.
ColorNavigator 6 factors for the different characteristics
between ColorEdge monitors and calibration devices to provide
accurate results.
Manual adjustment screen
ExportAdjustment
Matching between different ColorEdge monitors
Color deviation Readjustment Import
1514
Predictable
Color
Predictable
Color
Stable Image
Display
Stable Image
Display
Comfort and
Convenience
Comfort and
Convenience
Post
Production
Post
Production