User Manual

35
Chapter 4 SelfCalibration
●
Standard Mode
The Standard Mode setting is performed in “SelfCalibration” of the Adjustment menu.
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press
.
2. Choose “Standard Mode” from “SelfCalibration”, and press
.
The Standard Mode adjustment menu appears.
3. Choose “SelfCalibration” from the “Standard Mode” menu, and press .
4. Select “On” or “Off” with
or , and press .
5. Press
to exit.
4-2. Setting Monitor Date and Time
Set the monitor date and time.
Attention
• If the main power supply is disconnected for an extended period of time, the clock may need resetting.
Note
• When ColorNavigator 6 is started, the date and time are automatically set. For details, refer to the ColorNavigator
6 User's Manual (stored on the CD-ROM).
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press
.
2. Choose “Settings” from “SelfCalibration”, and press
.
3. Choose “Clock Adjustment” from “Settings”, and press
.
4. The Clock Adjustment menu appears.
5. Set date with
or , and press .
6. Set time with
or , and press .