User Manual

36
Chapter 4 SelfCalibration
4-3. Setting Calibration Schedule
Set the calibration schedule for SelfCalibration.
Procedure
1. Choose “SelfCalibration” from the Adjustment menu, and press
.
2. Choose “Settings” from “SelfCalibration”, and press
.
3. Choose “Schedule” from “Settings”, and press
.
The schedule setting menu appears.
4. Choose “Starting Time”, and press .
5. Set the “Starting Time” with
or .
Select the timing to execute SelfCalibration upon reaching the time set in the schedule.
Setting Function
Off SelfCalibration is not executed.
Power Save
To be executed under any of the following conditions.
• When the monitor is in “Power Save” mode or power is off at the set time.
• The monitor shifts to the power saving mode or the power is turned off when
the time period set in the schedule has elapsed.
Immediately SelfCalibration is executed immediately at the set time.
Press
after completing the setting.
6. Choose “Setting Type, and press .
Select the method for setting the adjustment schedule.
Setting Function Setting Example
Type-1 Execute once in every few months.
Execute once a month on Wednesday at
1:00 AM of the rst week.
Type-2 Execute once every few weeks.
Execute once every four weeks on Wednesday
at 1:00 AM.
Type-3
Execute when the monitor usage time
exceeds the set time.
Execute when the monitor usage time exceeded
200 hours.
Press
after completing the setting.
7. Select the interval for execution.
The setting details differ depending on the type of “Setting Type” set.
Type-1
Set the time at which SelfCalibration
is executed.
Set within 0:00 to 23:30.
Set the interval between executions
in months.
Set within 1 month to 12 months.
Select the week of the month
for execution. Choose between
week 1 to week 5.
Select the day for execution.
Select from SUN/MON/TUE/WED/
THU/FRI and SAT.
Attention
• If the fth week is selected but the fth week doesn’t have the selected day, adjustment will be executed
on the fourth week.