User Manual

42
Chapter 5 Connecting Multiple External Devices
5-1. Switching among Input Signals
The input signal switches each time is pressed.
When the signal is switched, the active input port name appears at the top right corner of the screen.
5-2. Setting Input Signal Switching Procedure
Setting Function
Auto The monitor automatically recognizes the connector through which signals are input and
displays images on the screen accordingly.
When an external device enters the power saving mode, the monitor automatically
displays another signal.
Manual The monitor displays the signal from the selected connector irrespective of whether there
is signal input. Select the input signal for display using the
operation button.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Selection” from “Tools”, and press
.
3. Select “Auto” or “Manual” using
or .
4. Press
after completing the setting.
Note
• When “Auto” is selected for “Input Selection”, the monitor’s power saving function works only when all
external devices are in the power saving mode.
5-3. Skipping Unused Input Signals
This function allows skipping unneeded input signals when the input signals are switched.
Procedure
1. Choose “Tools” from the Adjustment menu, and press
.
2. Choose “Input Skip” from “Tools”, and press
.
3. Use
or to select the input signal to change, and press .
4. Select “-” or “Skip” with
or .
5. Press
after completing the setting.
Note
• You cannot skip all input signals.