User Manual

Chapter 5 Connecting Multiple External Devices

5-4. Switching USB Port Automatically

This function allows for linking the input signal and the USB upstream port when one monitor is

connected to two PCs. This can switch the USB port automatically according to the switch of the input

signal. To calibrate one monitor using two PCs, the USB cables do not need to be connected again.

USB devices such as the mouse and keyboard connected to one monitor can be used with two PCs.

Attention

• A cap is attached to USB-2 at shipment. Remove the cap when using USB-2.

• To switch between USB ports two USB cables are required. Ensure cables are available.

• If a storage device such as a USB thumb drive is connected to the monitor, remove the device before changing

the setting. Otherwise, data may be lost or damaged.

• The key arrangement of the keyboard cannot be changed.

Note

• When the “Input Selection” function is set to “Auto”, the USB port automatically switches according to the switch

of the input signal.

• The USB downstream port can be operated using the currently displayed PC.

Procedure

1. Choose “Tools” from the Adjustment menu, and press

2. Choose “USB Selection” from “Tools”, and press

3. Choose the input signal to set using

or , and press .

4. Select “USB-1” or “USB-2” using

or .

5. Press

after completing the setting.