User Manual

9
Chapter 1 Introduction
1-2. Controls and Functions
●
Front
7 8 92 4 53
6
1
Adjustment menu
*1
1. Built-in calibration
sensor
Executes calibration for independent monitors. SelfCalibration function
(page 34)
Attention
• Do not touch the sensor as this will affect the measurement accuracy.
2. Ambient Light Sensor Measures ambient light.
3.
button
Switches input signals for display (page 42).
4.
button
Changes Color Mode (page 19).
5.
button
Cancels the setting/adjustment and displays the Adjustment menu.
6.
/ button
• Provides the menu selection as well as the adjustment and setting of a
function.
• Displays the Brightness menu (page 20).
7.
button
Displays the Adjustment menu, determines adjustment items on the menus, and
saves values adjusted.
8.
button
Turns the power on or off.
9. Power indicator Indicates the monitor’s operation status.
Blue : Operating
Flashing blue
(2 quick ashes
at a time)
: Indicates that recalibration is required if the SelfCalibration
schedule (page 36) is set.
Orange : Power saving mode
OFF : Main power/Power off
*1 See “1-4. Basic Operations and Functions” (page 12) for instructions on how to use.