User Manual

40
Chapter4SelfCalibration
4-6. Checking Adjustment Results
The previous SelfCalibration results can be checked.
●
To check adjustment results with CAL mode
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Result” from “Color”, and press
.
3. Choose “Calibration Result” from “Result”, and press
.
The adjustment result window appears.
Attention
• The measurement results of the ambient light sensor are used to check the difference between the current environmental
light level and the level of ambient light when SelfCalibration was executed, and are not reected in the SelfCalibration
results.
Note
• If “Ambient Light” is selected, the current environmental light is also displayed.
• If the environment in which the product is used is signicantly different to the previous environment, the ambient light
measurement results may differ greatly between the previous calibrations and current calibrations.
●
To check adjustment results with Standard Mode
1. Choose “SelfCalibration” from the Adjustment menu, and press .
2. Choose “Standard Mode” from “SelfCalibration”, and press
.
3. Choose “Result” from “Standard Mode”, and press
.
The adjustment result window appears.
4. Choose “Ambient Light” from “Result”, and press .
The measurement result screen of ambient light is displayed.