Important Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site: http://www.eizo.
[Location of Caution Statement] Product specifications may vary with sales areas. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com Copyright© 2010 EIZO NANAO CORPORATION All rights reserved.
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. ● LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part of a cloth with water to enhance its cleaning power.
CONTENTS Cover . ............................................................ 1 Notice for this monitor.............................................. 3 CONTENTS.............................................................. 5 2-6. Configuring moving image performance [Overdrive]...................................................... 26 Chapter 3 Setting Monitor.................................. 27 Chapter 1 Introduction......................................... 7 3-1.
CONTENTS 7-4. Displaying Monitor Information...................... 44 ● ● Displaying signal information [Signal Info]...... 44 Displaying monitor information [Monitor Info].... 44 7-5. Specifications................................................... 45 7-6. Glossary............................................................ 49 7-7. Preset Timing..................................................... 52 About TCO’ 03...................................................... 53 FCC Declaration of Conformity..
Chapter 1 Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • • • • • • • • 24” wide format LCD Wide color gamut of 98% of Adobe RGB Applicable to the resolution of 1920 dots x 1200 lines HDCP (High-bandwidth Digital Content Interface) Frame Synchronous mode supported (23.75 - 30.5Hz, 47.
NOTE • This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “3-4. Setting Orientation [Orientation]” (page 28).) • For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When using the monitor with “Portrait” position, the setting needs to be changed depending on the graphics board used in your PC.
1-3. Utility Disk An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the software programs. ● Disk contents and software overview The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme. txt” or the “read me” file on the disk for software startup procedures or file access procedures. Item Overview For For Windows Macintosh A “Readme.
1- 4. Basic Operation and Functions Basic operation of menu 1 Displaying Menu Displaying Adjustment menu Press . The adjustment menu appears. Menu title Current mode Item Settings Menu Displaying SelfCalibration menu Press , The SelfCalibration menu appears. Menu title Current time Item 2 10 Adjusting/Setting 1. Choose a menu to adjust/set with , and press . 2. Choose an item to adjust/set with , and press .
3. Adjust/set the selected item with 3 , and press . Exiting Press a few times. The adjustment menu finishes. Showing Button Guide Press the front buttons (except button), the button guide appears above the button. (When using the monitor with “Portrait” position, the button guide appears next to the button.) Tips • The button guide will continue to appear while the Adjustment menu or Mode menu is showing. • The button guide is displayed differently depending on the selected menu or status.
Functions The following table shows all the Adjustment menu’s adjustment and setting menus. Main Menu Color Item Adjusting/Setting “2-4. Color Adjustment” (page 20) Brightness Contrast Temperature Gamma Advanced Settings Hue Saturation Outline Enhancer Gain Black Level 6 Colors Screen Color Reset “3-9. Restoring the Default Setting” (page 31) Screen Size “2-5. Displaying Lower Resolutions” (page 26) Range Extension “2-2. Expanding Signal Output Range [Range Extension]” (page 16) “2-3.
The following table shows all SelfCalibration menu’s adjustment and setting menus. Main Menu SelfCalibration Item Calibration Result Calibration Result Ambient Light Setting Mode Selection Target Adjusting/Setting “4-1. Executing SelfCalibration [Calibration]” (page 32) “4-2. Checking Calibration Results [Result]” (page 32) “4-3.
Chapter 2 Adjusting Screen 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Analog Input Resolution 640×480 720×400 800×600 1024×768 1280×960 1280×1024 1600×1200 1680×1050 1920×1080 1920×1200* Display Mode VGA VGA TEXT VESA VESA VESA VESA VESA VESA CVT CEA-861 VESA CVT RB Frequency Dot Clock 60Hz 70Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 60Hz 170MHz (Max.
Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the “Screen Resolution” dialog, select the monitor. 4. Click “Resolution” to select the desired resolution. 5. Click the [OK] button. 6. When a confirmation dialog is displayed, click [Keep changes].
2-2. Expanding Signal Output Range [Range Extension] The signal range can be expanded to meet the input signal from 64/1023 - 1019/1023 to 0/1023 -1023/1023. Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press 3. Select “On” with or . 4. Press to exit the adjustment. . Attention • Settings cannot be performed when CAL mode is being displayed. 2-3.
Attention • This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It does not work properly when an image is displayed only on a part of the screen (command prompt window, for example) or when a black background (wallpaper, etc.) is in use. • This function does not work correctly with some graphics boards.
4 ● Perform advanced adjustments for the following using the menu of the . Adjust the clock, phase and position, in this order. To eliminate vertical bars [Clock] Procedure 1. Choose from the menu, and press 2. Adjust the clock with or . Press 3. Press . slowly so as not to miss the adjustment point. to exit the adjustment.
5 ● Adjust the color gradation. To adjust color gradation automatically [Range Adjustment] Every color gradation (0 to 255) can be displayed by adjusting the signal output level. Procedure 1. Display Pattern 2 in full screen on the monitor using the “Screen Adjustment Utility” or the screen adjustment pattern files. 2. Choose from the menu, and press . The color gradation is adjusted automatically. When the auto adjustment is completed, a message appears.
2-4. Color Adjustment ● To select the display mode (Color Mode) Color Mode allows you to select easily the adequate mode suitable for the monitor’s application. Color Mode Mode 1-Custom Purpose Available for the color settings according to your preference. 2-Adobe® RGB Suitable for color matching with Adobe® RGB compatible peripherals. 3-sRGB Suitable for color matching with sRGB compatible peripherals.
● To perform advanced adjustments The menu of the Adjustment menu allows you to set and save the independent color adjustment for each mode. Attention • Wait 30 minutes or more from monitor power on before starting the color adjustment. (Allow the monitor to warm up for at least 30 minutes before making adjustments.) • Perform the range adjustment first when adjusting color for analog input signals. (Refer to “To adjust color gradation automatically” on page 19).
● To adjust the brightness [Brightness] The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD back panel). Adjustable range: 0 to 100% Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press . Choose from the menu, and press . Adjust the brightness with or . Press to exit the adjustment. NOTE • You can also adjust the brightness using and .
● To adjust the gamma value [Gamma] The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal, however, the variation rate is not proportional to the input signal. To keep the balance between the input signal and the luminance of the monitor is called as “Gamma correction”. Adjustable range: 1.6-2.7 (0.1 unit) Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press Choose from the menu, and press Adjust the gamma value with or .
● To enhance the outline of the image [Outline Enhancer] OutlineEnhancer functions to emphasize outline of the images by emphasizing the color difference between pixels composing the images. This may improve the texture of the material and its feel of the images. On the contrary, it also functions to reproduce the images smoothly by gradating its outline. Procedure 1. 2. 3. 4. 5. ● Choose from the Adjustment menu, and press . Choose from the menu, and press .
● To adjust six colors [6 Colors] The hue and saturation can be adjusted for each of six colors: Magenta, Red, Yellow, Green, Cyan, and Blue. Adjustable range: -100 to 100 Procedure 1. 2. 3. 4. Choose from the Adjustment menu, and press . Choose from the menu, and press . Choose <6 Colors>, and press . Choose the color for adjustment among , , , , , or , and press . 5. Select or , and press . 6.
2-5. Displaying Lower Resolutions ● To change screen size [Screen Size] The image with the resolution other than the recommended resolution is displayed in full screen automatically. You can change the screen size by using from menu. Menu Full (default setting) Enlarged Normal Function Displays an image in full screen. Images are distorted in some cases because the vertical rate is not equal to the horizontal rate. Displays an image in full screen.
Chapter 3 Setting Monitor 3-1. Enabling/Disabling Mode Selection [Mode Preset] Allows you to select the specified modes only. Use this function when all the display modes are not available or when keeping the display mode unchanged. Procedure 1. 2. 3. 4. 5. Choose from the Adjustment menu, and press . Choose from the menu, and press . Select the mode to change its settings with or , and press Select “On” or “Off” with or . Press to exit the adjustment. .
3-3. Setting the EIZO Logo Display [Logo] The EIZO logo appears on the display when turning on the monitor. This function allows you to display, or not, the EIZO logo. Procedure 1. Press 2. Press to turn off the monitor. holding down at least 2 seconds to turn on the monitor. The Optional Settings menu appears. 3. 4. 5. 6. Choose from the menu, and press Select “On” or “Off” with or , and press . Select “Finish” with or . Press to exit the Optional Settings. .
3-5. Setting Language [Language] This function allows you to select a language for the adjustment menu or displaying message. Selectable languages English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese Procedure 1. 2. 3. 4. Choose
3-7. Setting the Display Position of the Adjustment Menu [Menu Position] Adjust the menu position using the following procedure. Procedure 1. Choose
from the Adjustment menu, and press . 2. Choose from the menu, and press 3. Select a menu position with or . 4. Press to exit the adjustment. . 3-8. Sets the brightness of the front buttons [Indicator] The brightness of the power button (blue) and operation keys (white) when the screen is displayed can be set.3-9. Restoring the Default Setting There are two types of Reset. One is to reset the color adjustment only to the default settings, and the other is to reset all the settings to the default settings. Attention • After resetting, you cannot undo the operation. NOTE • For main default settings, refer to “Main default settings (factory settings)” on page 46.
Chapter 4 SelfCalibration This product is equipped with an built-in calibration sensor. This function allows you to set the calibration targets or schedule in advance, and automatically execute regular calibration. Calibration can be executed independently by the monitor. Attention • To execute SelfCalibration, it is necessary to set the calibration targets etc. • For more information, refer to “4-3. Setting Calibration Details [Setting]” (page 33).
4-3. Setting Calibration Details [Setting] ● Setting the mode to execute SelfCalibration [Mode Selection] Set the mode to execute SelfCalibration. Procedure 1. 2. 3. 4. 5. Choose from the SelfCalibration menu, and press Choose from the Setting menu, and press Select the mode to change with or , and press . Select “On” or “Off” with or . Press to exit the adjustment. . . NOTE • When “CAL1/CAL2/CAL3” is set to “On”, SelfCalibration can be executed.
● Setting the monitor date and time [Clock Adjustment] Set the monitor date and time. NOTE • When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s Manual on the CD-ROM. Procedure . 1. Choose from the SelfCalibration menu, and press 2. Choose from the Setting menu, and press . The Clock Adjustment menu appears. 3. Select the date using or , and then press . 4. Select the time using or , and then press .
● Setting the calibration schedule [Schedule] Set the calibration schedule for SelfCalibration. Attention • Clock adjustment is necessary for SelfCalibration to operate. Procedure 1. Choose from the SelfCalibration menu, and press 2. Choose from the Setting menu, and press . The schedule setting menu is displayed. 3. Select the items to change with or , and press .
Chapter 5 Power Saving Function 5-1. Setting the Power Saving [Power Save] This function allows you to set the monitor into the power saving mode according to the PC status. When the monitor enters the power saving mode, no image is displayed on the screen. Attention • Either switch off the main power supply or remove the power plug from the socket to completely stop the supply of electricity to the monitor.
Chapter 6 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • • • • 1. No-picture problems → See No.1 - No.2. Imaging problems (digital input) → See No.3 - No.8. Imaging problems (analog input) → See No.3 - No.12. Other problems → See No.13 - No.16. Problems No picture • Power indicator does not light. Possible cause and remedy • Check whether the power cord is connected correctly.
4. 5. Problems Characters are blurred • Afterimages appear • • • 6. 8. Green/red/blue/white dots or defective dots remain on the screen. Interference patterns or pressure marks remain on the screen. Noise appears on the screen. 9. Display position is incorrect. 7. • Possible cause and remedy Check whether the signal setting of your PC matches the resolution and the vertical frequency settings for the monitor. Adjust using . (page 24) Afterimages are particular to LCD monitors.
Problems 16. The monitor connected with the USB cable is not detected. / USB devices connected to the monitor does not work. • • • • • • Possible cause and remedy Check whether the USB cable is connected correctly. (page 43) Change the USB port to another one. If the PC or peripheral devices works correctly by changing the USB port, contact your local dealer. (Refer to the manual of the PC for details.) Reboot the PC.
Chapter 7 Reference 7-1. Attaching an Arm The stand can be removed and replaced with an arm (or another stand) to be attached to the monitor. Use an arm or stand of EIZO option. Attention • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. - Clearance between the screw holes: 100 mm × 100 mm - Thickness of plate: 2.
7-2. Connecting More than Two PCs to the Monitor More than two PCs can be connected to the monitor through the DVI-I and the DisplayPort connector on the back of the monitor.
● To set input signal selection [Input Selection] Setting Auto Manual Function The monitor recognizes the connector through which PC signals are input. When a PC is turned off or enters the powersaving mode, the monitor automatically displays another signal. The monitor detects only the PC’s signals currently displaying automatically. Select an active input signal with . Procedure 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press .
7-3. Making Use of USB (Universal Serial Bus) This monitor has a hub compatible with USB. Connected to a PC compatible with USB or another USB hub, this monitor functions as a USB hub allowing connection to peripheral USB devices. ● Required System Environment 1. A PC equipped with a USB port or another USB hub connected to a USB compatible PC 2. Windows 2000/XP/Vista/7 or Mac OS 9.2.2 and Mac OS X 10.2 or later 3.
7-4. Displaying Monitor Information ● Displaying signal information [Signal Info] This function displays the information about the current input signals displayed. 1. Choose from the Adjustment menu, and press . 2. Choose from the menu, and press . The Signal Info screen appears. (Example) ● Displaying monitor information [Monitor Info] This function displays the information about the monitor. 1. Choose from the Adjustment menu, and press . 2.
7-5. Specifications LCD Panel Size 24.1-inch (610 mm) TFT color LCD Surface treatment Hard Coating Surface hardness 3H Viewing angle Viewing angle : Horizontal 178°, Vertical 178° (CR:10 or more) Dot Pitch 0.270 mm Response Time Approx. 13ms Horizontal Scan Analog Frequency Digital 24-76 kHz Vertical Scan Frequency Analog 47.5-86 Hz(1600 × 1200, 1920 × 1200: 47.5-61 Hz) Digital 23.75-63 Hz (VGA TEXT: 69-71 Hz) 26-78 kHz Frame Synchronous mode Analog 47.5-61 Hz Digital 23.75-30.
Movable range Environmental Conditions USB Tilt 30° Up, 0° Down Swivel 172° Right, 172° Left Adjustable height 225 mm (8.9 inch) (Tilt 0°:157 mm (6.2 inch)) Rotation 90° (clockwise) Temperature Operating temperature: 0 °C - 35 °C (32 °F - 95 °F) Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F) Humidity Operating humidity: 20% - 80% R.H. (no condensation) Storage humidity: 10% - 80% R.H.
Outside Dimensions 532 (20.9) 95 (3.74) 172 ° 172 ° 566 (22.3) 520.4 (20.5) (22.8 (0.90)) (35.5 (1.40)) (22.8 (0.90)) swivel 92.5 (3.64) (64 (2.52)) 7.5 (0.30) 100 (3.9) 233 (9.2) 27 (1.06) 233 (9.2) 148.5 (5.8) swivel Unit: mm (inch) φ220 (36 (1.42)) 235.5 (9.3) (256 (10.1)) 133.5 (5.3) 100 (3.9) 9.5 (0.37) 171.5 (6.8) 14.5 (0.57) (20.5 (0.81)) 72 (2.83) 198 (7.8) 332.5 (13.1) 30° tilt 396.5 (15.6) 355 (13.0) 411.1 (16.2) 553.5 (21.8) 638 (25.1) 326 (12.8) (241 (9.5)) (8.
Connector Pin Assignment • DVI-I connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Pin No. 1 2 3 4 5 C1 C2 C3 C4 C5 Signal T.M.D.S. Data 2T.M.D.S. Data 2+ T.M.D.S. Data2/4 Shield NC* NC* Pin No. 11 12 13 14 15 Signal 6 7 8 9 DDC Clock (SCL) DDC Data (SDA) Analog Vertical Sync T.M.D.S. Data1- 16 17 18 19 T.M.D.S. Data1/3 Shield NC* NC* +5V Power Ground (return for +5V, Hsync, and Vsync) Hot Plug Detect T.M.D.S. Data0T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield 10 T.M.D.S.
7-6. Glossary Adobe® RGB This is a definition of the practical RGB color space proposed by Adobe Systems in 1998. The color reproduction range (color gamut) is broader than sRGB, and is highly adaptable to such fields as printing etc. Clock The analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics system in use, when the analog input signal is converted to a digital signal for image display. This is called clock adjustment.
Gamma Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma Characteristic”. A small gamma value produces a low-contrast image, while a large gamma value produces a highcontrast image. HDCP (High-bandwidth Digital Contents Protection) Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.
Temperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature. 5000K: Slightly reddish white (usually used in print industry) 6500K: White called daylight color (suited for web browsing) 9300K: Slightly bluish white (usually used for television) TMDS (Transition Minimized Differential Signaling) A signal transmission system for digital interface.
7-7. Preset Timing The following table shows factory preset video timing (for analog signal only). Attention • Display position may be deviated depending on the PC connected, which may require screen adjustment using Adjustment menu. • If a signal other than those listed in the table is input, adjust the screen using the Adjustment menu. However, screen display may still be incorrect even after the adjustment.
Congratulations! The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the Impact on our natural environment.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: ColorEdge CG245W is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
BEGRENZTE GARANTIE EIZO NANAO CORPORATION (im Weiteren als „EIZO“ bezeichnet) und die Vertragsimporteure von EIZO (im Weiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der das in diesem Dokument vorgegebene Produkt (im Weiteren als „Produkt“ bezeichnet) von EIZO oder einem Vertrieb erworben hat, gemäß den Bedingungen dieser beschränkten Garantie (im Weiteren als „Garantie“ bezeichnet), dass EIZO und der Vertrieb nach eigenem Ermessen das
GARANTIE LIMITÉE EIZO NANAO CORPORATION (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés « Distributeurs »), sous réserve et conformément aux termes de cette garantie limitée (ci-après dénommée « Garantie »), garantissent à l’acheteur initial (ci-après dénommé « Acheteur initial ») du produit spécifié dans la présente (ci-après dénommé « Produit ») acheté auprès d’EIZO ou de Distributeurs agréés EIZO, que EIZO et ses Distributeurs auront pour option de réparer ou rempla
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados por EIZO (en lo sucesivo los “Distribuidores”), con arreglo y de conformidad con los términos de esta garantía limitada (en lo sucesivo la “Garantía”), garantizan al comprador original (en lo sucesivo el “Comprador original”) que compró el producto especificado en este documento (en lo sucesivo el “Producto”) a EIZO o a sus Distribuidores, que EIZO y sus Distribuidores, a su propio criterio, repararán o sustitu
GARANZIA LIMITATA EIZO NANAO CORPORATION (a cui si farà riferimento da qui in poi con “EIZO”) ed i Distributori autorizzati da EIZO (a cui si farà riferimento da qui in poi con “Distributori”) garantiscono, secondo i termini di questa garanzia limitata (a cui si farà riferimento da qui in poi con “Garanzia”) all’acquirente originale (a cui si farà riferimento da qui in poi con “Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da qui in poi con “
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprunglige köparen (nedan kallad den “Ursprunglige köparen”) som köpte den i dokumentet specificerade produkten (nedan kallad “Produkten”) från EIZO eller Distributörer, att EIZO eller Distributörer enligt eget gottfinnande kostnadsfritt antingen reparera eller byta ut den defekta Pr
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO NANAO CORPORATION (στο εξής «EIZO») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής «Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»), στον αρχικό αγοραστή (στο εξής «Αρχικός Αγοραστής») ο οποίος αγόρασε το προϊόν που καθορίζεται στο παρόν έγγραφο (στο εξής «Προϊόν») από την EIZO ή τους Διανομείς, η οποία εξασφαλίζει ότι η EIZO και οι Διανομείς, σύμφωνα με τη διακριτή ευχέρειά τους, είτε θα επισκευάσου
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем “Первоначальный покупатель”), который приобрел у EIZO или Дистрибуторов продукт, указанный в этом документе (называемый в дальнейшем “Продукт”), что EIZO или Дистрибуторы на свое усмотрение л
有限责任保证书 EIZO NANAO有限公司(以下简称 EIZO )和EIZO授权的经销商(以下简称 经销商 ),接受并依照本有限责任保证书( 以下简称 保证书 )之条款,向从EIZO和经销商购买本文中所规定产品(以下简称 产品 )的原买方(以下称 原买方 )提 供保证:在保证期内(规定如下),如果原买方发现(i)按本产品所附使用说明书(以下简称 用户手册 )所述方式正常使 用本产品过程中,本产品出现故障或损坏;或(ii)按用户手册所述方式正常使用本产品过程中,本产品的液晶显示屏(LCD) 及亮度未能达到用户手册中所述的推荐亮度时,EIZO和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为本产品的使用时间在3万小时以下的条件下自购买本产品之日起的五(5)年(以下简称 保证期限 ),但 液晶显示屏(LCD)的保证期限定为自购买本产品之日起三(3)年的期间。仅当在用户手册中所述的推荐亮度条件下使 用本产品时,才保证本产品的亮度,亮度的保证期限定为本产品的使用时间在1万小时以下的条件下自购买本产品之日起 三(3)年。EIZO和经销商将不向原买方或任何第三方承担本保证书所规定之外的与本产品有关任何责任或义
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」,适用于在中华人民共和国销售的电子信息产品。标识中央的数字为 环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会产生对环境污 染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 印刷电路板 机箱 液晶显示器 其他 ○: ×: 铅 (Pb) × ○ × × 汞 (Hg) ○ ○ × ○ 有毒有害物质或元素 镉 六价铬 (Cd) (Cr(VI)) ○ ○ ○ ○ ○ ○ ○ ○ 多溴联苯 (PBB) ○ ○ ○ ○ 多溴二苯醚 (PBDE) ○ ○ ○ ○ 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006规定的限量要求以下。 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006规定的限量要求。(企业可在此处,根据实际情況对上 表中打“×”的技术原因进行进一步说明) 65