User`s manual

25
Chapter2AdjustingScreens
To set clipping
This function allows you to display the monitor with the colors based on the standard values of the dened
color gamut (such as sRGB). The method of displaying the dened color gamut outside the normal gamut of the
monitor can be set.
Procedure
1. Choose “Color” from the Adjustment menu, and press
.
2. Choose “Advanced Settings” from “Color”, and press
.
3. Choose “Clipping”, and press
.
4. Select “On” or “Off” with
or .
On Off
Displayscolorsbasedonthestandardvalues.The
colorsoutsidethegamutofthemonitorareclipped.
Displayscolorswithpriorityonthecolorgradation
ratherthanthecoloraccuracy.Theprimarycolors
outsidethegamutofthemonitor(blueinthediagram)
areadjustedtothecolorsmostsimilartothosethat
canbedisplayedbythemonitor.
Colorgamutofmonitor
Colorgamutdefinedbystandard
Colorgamutdisplayedonscreen
Attention
• This is a conceptual diagram, and does not display the actual color gamut of the monitor.
5. Press to exit.
Attention
• This function will be disabled if “Native” is selected at “To set color gamut” (page 23).