User`s manual
51
Chapter8Reference
8-2. Making Use of USB (Universal Serial Bus)
This monitor has a USB hub. It works as a USB hub when connected to a USB-compatible PC, allowing the
connection of peripheral USB devices.
●
System Requirement
• A PC (including devices with a USB host function) and OS in conformance with USB Specication Revision
2.0
• USB cable
Attention
• This monitor may not work depending on PC, OS or peripheral devices. For USB compatibility of peripheral devices,
contact their manufactures.
• Devices connected to the USB downstream port work when the monitor is in power saving mode or when the power
button of the monitor is Off. Therefore, power consumption of the monitor varies with connected devices even in the
power saving mode.
• When the main power of the monitor is Off, device connected to the USB downstream port does not operate.
●
Procedure
1. Connect the signal cable between a PC and the monitor, and turn on the PC.
2. Using the USB cable, connect the computer’s downstream port and the monitor’s upstream port 1.
3. Connect the peripheral USB device to the USB downstream port of the monitor.
Note
• By default, USB upstream port 1 is enabled. To connect two PCs, see “5-4. Switching USB Port Automatically” (page 43).
USB
downstream
port
USB
upstream
port