User`s manual

Chapter1Introduction

Chapter 1 Introduction

1-1. Features

• 27.0″ wide format LCD

• Wide color gamut (Adobe RGB coverage: 99%)

• Supports a resolution of 2560 × 1440.

• IPS panel with 178˚ horizontal and vertical viewing angles

• Frame synchronization mode supported (23.75 - 30.5Hz, 47.5 - 61.0Hz)

• 3 signal input terminals (DVI-D × 1, HDMI × 1, DisplayPort × 1)

- DisplayPort (applicable to 8 bit and 10 bit)

Supports reduced display of 4K signals

- HDMI (applicable to 8 bit, 10 bit, and 12 bit)

*1, *2

Can handle PC signals in HDMI input

*1 Not applicable to audio signals.

*2 The maximum screen display is 10 bits.

• Color mode function

Reproduces a color temperature, gamma, and gamut compliant with the following standard.

- Broadcasting standards “EBU/REC709/SMPTE-C”

- Digital cinema standard “DCI”

- Adobe

RGB / sRGB

See “2-2. Selecting the display mode (color mode)” (page 20)

• Attaching the “Adjustment Certicate”, which describes the factory measurement results of the grayscale and

uniformity characteristics for each monitor

• Portrait/Landscape display available (rotate 90˚ clockwise)

• This product is equipped with a built-in calibration sensor, and supports SelfCalibration in which the monitor

executes calibration independently.

See “Chapter 4 SelfCalibration” (page 35)

• The provided Color Management Software “ColorNavigator” enables you to calibrate monitor characteristics

and generate color proles

See “1-3. EIZO LCD Utility Disk” (page 11)

• Power saving function

Suppressing the power consumption reduces the carbon dioxide emissions. This product is equipped with power saving

function.

- 0 W power consumption when the main power is off

Equipped with main power switch.

When the monitor is not required, the power supply can be shut off using the main power switch.

• Displays HDCP (High-bandwidth Digital Protection) protected contents.