Important Please read PRECAUTIONS, this User’s Manual and Setup Guide (separate volume) carefully to familiarize yourself with safe and effective usage. • Please read the Setup Guide (separate volume) • The latest User’s Manual is available for download from our site: http://www.eizo.
[Location of the Caution Statements] Product specifications may vary with sales areas. Confirm the specifications in the manual written in the language of the region of purchase. This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of office equipment. For overview of the TCO, refer to our website. http://www.eizo.com As an ENERGY STAR® Partner, EIZO NANAO CORPORATION has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Notice for this monitor Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications.
Cleaning Attention • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, disinfectant, and abrasive cleaner, which may damage the cabinet or LCD panel. ● LCD Panel • Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by using the provided ScreenCleaner, or moistening part of a cloth with water to enhance its cleaning power.
CONTENTS Cover . ............................................................ 1 Notice for this monitor.............................................. 3 FCC Declaration of Conformity.......................... 30 HinweiseHinweise zur Auswahl des richtigen CONTENTS.............................................................. 5 Schwenkarms für Ihren Monitor......................... 31 1. Introduction........................................................ 6 Hinweis zur Ergonomie.........................
1. Introduction 1. Introduction Thank you very much for choosing an EIZO Color Monitor. 1-1. Features • 29.8 inch class wide screen format LCD • Wide color gamut of 98% of Adobe RGB • WQXGA (2560 × 1600) display compliant • HDCP signal (SIGNAL2) compliant • Dual-display compliant by introducing dual-input system (DVI-D × 2 connectors) • DVI digital input (TMDS) compliant • Horizontal scan frequency: 26 - 100 kHz • Vertical scan frequency: 29.5 - 30.
1. Introduction Tips • This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the Adjustment menu when using the monitor screen in vertical display position. (Refer to “3-8. Setting the Orientation of the Adjustment Menu” (page 22).) • For using the monitor with “Portrait” position, the graphics board supporting portrait display is required.
1. Introduction 1-3. Utility Disk An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the disk contents and the overview of the application software programs. Disk contents and software overview The disk includes software programs for adjustment and User’s Manual. Refer to "Readme.txt" or the "read me" file on the disk for software startup procedures or file access procedures. Item Overview For Windows A “Readme.
2. Installation 2. Installation 2-1. Setting Screen Resolution Compatible Resolutions/Frequencies The monitor supports the following resolutions. Frequency Resolution Dot clock Horizontal (Hz) *1 *2 *3 25.2 MHz VGA TEXT 720 × 400 @ 70Hz 28.3 MHz VESA 800 × 600 @ 60Hz 40.0 MHz VESA 1024×768 @ 60Hz 65.0 MHz VESA CVT 1280×1600 @ 60Hz 142.0 MHz VESA 1280×960 @ 60Hz 108.0 MHz VESA 1280×1024 @ 60Hz 108.0 MHz VESA 1600×1200 @ 60Hz 162.0 MHz VESA CVT 1680×1050 @ 60Hz 146.
2. Installation Setting Resolution When you connect the monitor to the PC and find that the resolution is improper, or when you want to change the resolution, follow the procedure below. ● Windows 7 1. Right-click the mouse anywhere on the desktop except for icons. 2. From the displayed menu, click “Screen resolution”. 3. On the "Screen Resolution" dialog, select the monitor. 4. Click "Resolution" to select the desired resolution. 5. Click the [OK] button. 6.
2. Installation 2-2. Environmental Settings Depending upon your operating environment, it may be necessary to set the frequency that corresponds to your graphics board. If you install it for the first time or change environment, set the monitor. NOTE • • • • Factory default settings are for single display mode and Dual Link. We recommend using ColorNavigator with single display mode in landscape orientation. Refer to the manual of the graphics board.
2. Installation 4 The menu will appear in the middle of the screen. Press the buttons to select "Dual Display" and then press . Displaying 10-bit color signals 10-bit color signals can be displayed. How to set 1 Connect the [SIGNAL1] signal input connector and the computer using the [DD200DL-BK] signal cable. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
2. Installation 2-3. Making Use of USB (Universal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system environment 1. PC equipped with USB ports or another USB hub connected to the USB compliant PC 2. Windows 2000/XP/Vista /7 or Mac OS 9.2.2 and Mac OS X 10.2 or later 3.
3. Screen Adjustment and Settings 3. Screen Adjustment and Settings 3-1. Basic Operation and Functions ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily. Adjustment menu (ScreenManager ®) Enter button Power button FineContrast Menu Mode button Control buttons (Left, Down, Up, Right) NOTE • The Adjustment menu and the FineContrast menu cannot be displayed at the same time.
3. Screen Adjustment and Settings Functions The following table shows all the ScreenManager's adjustment and setting menus. Main menu Screen Color(Custom)*1 PowerManager Others Sub menu Smoothing Brightness Temperature Gamma Saturation Hue Gain 6 Colors Reset DVI DMPM OFF Screen Size Border Intensity Input Signal “3-3. Power-save Setup” (page 19) “3-7.
3. Screen Adjustment and Settings 3-2. Color Adjustment Simple Adjustment [FineContrast mode] This function allows you to select the best display mode for monitor brightness, etc. ● To select FineContrast mode Directly pressing allows you to select the best suited mode for screen display from 4 FineContrast modes; Custom, sRGB, EMU, and CAL. MODE Press to exit the menu. ->Custom -> sRGB -> EMU -> CAL Tips • The Adjustment menu and the FineContrast menu cannot be displayed at the same time.
3. Screen Adjustment and Settings Advanced Adjustments [Adjustment menu] Color settings of each FineContrast mode can be adjusted and saved by using the menu of the Adjustment menu. Adjustment Items The adjustable items and displayed icons on the menu depend on the selected FineContrast mode.
3. Screen Adjustment and Settings Adjustment Contents Menu Brightness Function Descriptions To set the brightness of the screen Adjustable range 0~100% Tips • The values shown in the “%” are available only as reference. Temperature To set the color temperature 4000K~10000K in 500 K increments (including 9300 K) Tips • The values shown in the Kelvin are available only as a reference tool. • While color temperature is adjusted, is adjusted automatically according to the color temperature.
3. Screen Adjustment and Settings 3-3. Power-save Setup The menu in the ScreenManager enables to set the power-save setup. NOTE • Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting the monitor from the power supply is recommended to save energy completely. • Even if the monitor is in a power saving mode, USB compliant devices function when they are connected to the monitor's USB (both the upstream and the downstream ports).
3. Screen Adjustment and Settings 3-4. Off Timer The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use. [Procedure] 1. Select in the ScreenManager menu. 2.
3. Screen Adjustment and Settings 3-6. Power Indicator Setting Light off the power indicator. This function is available for the multiple panels settings. [Procedure] 1. Select in the ScreenManager menu. 2. Select "Disable". 3-7. Displaying Lower Resolutions The lower resolutions are enlarged to full screen automatically. Using the function in the menu enables to change the screen size.
3. Screen Adjustment and Settings 3 Set the brightness of the black area surrounding the displayed image. Set the . In the "Enlarge" mode or "Full Screen" mode, the outer area (border) is usually black. Select in the menu and adjust by using . Border 3-8. Setting the Orientation of the Adjustment Menu The orientation of the Adjustment menu can be changed. [Procedure] 1. Select
4. Troubleshooting 4. Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. • No-picture problems : See No.1 - No.2 • Imaging problems : See No.3 - No.9 • Other problems : See No.10 - No.12 • USB problems : See No.13 - No.14 Problems Possible cause and remedy • Check whether the power cord is connected correctly. If the problem persists, turn off the monitor, and then turn it on again a few minutes later. 1.
4. Troubleshooting Problems Possible cause and remedy 3. Characters are blurred. • Adjust using (page 21). 4.The screen is too bright or too dark. • Adjust . (The LCD monitor backlight has a fixed life span. When the screen becomes dark or begins to flicker, contact your local dealer.) 5.Afterimages appear. • Afterimages are particular to LCD monitors. Avoid displaying the same image for a long time.
5. Reference 5. Reference 5-1. Attaching an Arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor. NOTE • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard. Use M4 × 12 mm screws supplied with the monitor. - Clearance between the screw holes: 100 mm × 100 mm - Thickness of plate: 2.
5. Reference 5-2. Specifications LCD Panel Viewing Angle 75.6 cm (29.8 inch), TFT color LCD panel Surface treatment : Anti-Glare Hard Coating Surface hardness : 3H Response Time : 12ms Horizontal : 178°, Vertical : 178°(CR: 10 or more) Dot Pitch Dot Clock (Max.) 0.2505mm 269 MHz Horizontal Scan Frequency 26~100 kHz Vertical Scan Frequency 29.5 - 30.5Hz, 59 - 61Hz (VGA TEXT: 69 ~ 71 Hz) Resolution Display Colors 2560 dots x 1600 lines 16.77 million colors (max.
5. Reference Dimensions mm (inch) 35° 51 (2.01) 57 90 (2.24) (3.54) 138.5(5.5) 628 (24.7) 588 (23.1) 240 (9.4) 35° SWIVEL 322.8(12.7) 405.6(16) 347.7(13.7) TILT 1.6 (0.06) 40° 294.5(11.6) 100 (3.9) 294.5(11.6) 9.5(0.37) 100 (3.9) 265(10.4) 254.7(10) 17 (0.67) 404.5(15.9) 118(4.6) 629.5(24.8) 179.5(7.1) 61.5 (2.42) 1.6 (0.06) 23.6 (0.93) 402.8(15.9) 450(17.7) 23.6 (0.93) 175(6.9) 1.6 (0.06) 22.9 175(6.9) 689(27.1) 643.3(25.3) 1.6 (0.06) 406.5(16) 170(6.7) 299(11.8) 272(10.
5. Reference Pin Assignment •DVI-D Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 SIGNAL1 : Applicable to DualLink Pin No. Signal Pin No. Signal Pin No. Signal 1 2 3 4 5 6 7 T.M.D.S. Data 2T.M.D.S. Data 2+ T.M.D.S. Data2/4 Shield T.M.D.S. Data 4T.M.D.S. Data 4+ DDC Clock (SCL) DDC Data (SDA) 9 10 11 12 13 14 15 17 18 19 20 21 22 23 T.M.D.S. Data0T.M.D.S. Data0+ T.M.D.S. Data0/5 Shield T.M.D.S. Data 5T.M.D.S. Data 5+ T.M.D.S. Clock shield T.M.D.S. Clock+ 8 NC* 16 T.
5. Reference 5-3. Glossary DVI (Digital Visual Interface) A digital flat panel interface. DVI can transmit digital data from the PC directly without loss with the signal transition method "TMDS". There are two kinds of DVI connectors. One is DVI-D connector for digital signal input only. The other is DVI-I connector for both digital and analog signal inputs. DVI DMPM (DVI Digital Monitor Power Management) The Power management system for the digital interface.
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only FCC Declaration of Conformity We, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 Warland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product Trade name: EIZO Model: ColorEdge CG303W is in conformity with Part 15 of the FCC Rules.
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
BEGRENZTE GARANTIE EIZO NANAO CORPORATION (im Weiteren als „EIZO“ bezeichnet) und die Vertragsimporteure von EIZO (im Weiteren als „Vertrieb(e)“ bezeichnet) garantieren dem ursprünglichen Käufer (im Weiteren als „Erstkäufer“ bezeichnet), der das in diesem Dokument vorgegebene Produkt (im Weiteren als „Produkt“ bezeichnet) von EIZO oder einem Vertrieb erworben hat, gemäß den Bedingungen dieser beschränkten Garantie (im Weiteren als „Garantie“ bezeichnet), dass EIZO und der Vertrieb nach eigenem Ermessen das
GARANTIE LIMITÉE EIZO NANAO CORPORATION (ci-après dénommé « EIZO ») et les distributeurs autorisés par EIZO (ci-après dénommés « Distributeurs »), sous réserve et conformément aux termes de cette garantie limitée (ci-après dénommée « Garantie »), garantissent à l’acheteur initial (ci-après dénommé « Acheteur initial ») du produit spécifié dans la présente (ci-après dénommé « Produit ») acheté auprès d’EIZO ou de Distributeurs agréés EIZO, que EIZO et ses Distributeurs auront pour option de réparer ou rempla
GARANTÍA LIMITADA EIZO NANAO CORPORATION (en lo sucesivo “EIZO”) y sus distribuidores autorizados por EIZO (en lo sucesivo los “Distribuidores”), con arreglo y de conformidad con los términos de esta garantía limitada (en lo sucesivo la “Garantía”), garantizan al comprador original (en lo sucesivo el “Comprador original”) que compró el producto especificado en este documento (en lo sucesivo el “Producto”) a EIZO o a sus Distribuidores, que EIZO y sus Distribuidores, a su propio criterio, repararán o sustitu
GARANZIA LIMITATA EIZO NANAO CORPORATION (a cui si farà riferimento da qui in poi con “EIZO”) ed i Distributori autorizzati da EIZO (a cui si farà riferimento da qui in poi con “Distributori”) garantiscono, secondo i termini di questa garanzia limitata (a cui si farà riferimento da qui in poi con “Garanzia”) all’acquirente originale (a cui si farà riferimento da qui in poi con “Acquirente originale”) che ha acquistato il prodotto specificato in questo documento (a cui si farà riferimento da qui in poi con “
BEGRÄNSAD GARANTI EIZO NANAO CORPORATION (nedan kallat “EIZO”) och EIZOs auktoriserade distributörer (nedan kallade “Distributörer”) garanterar i enlighet med villkoren i denna begränsade garanti (nedan kallad “Garantin”) den ursprunglige köparen (nedan kallad den “Ursprunglige köparen”) som köpte den i dokumentet specificerade produkten (nedan kallad “Produkten”) från EIZO eller Distributörer, att EIZO eller Distributörer enligt eget gottfinnande kostnadsfritt antingen reparera eller byta ut den defekta Pr
ΠΕΡΙΟΡΙΣΜΕΝΗ ΕΓΓΥΗΣΗ Η EIZO NANAO CORPORATION (στο εξής «EIZO») και οι διανομείς που εξουσιοδοτεί η EIZO (στο εξής «Διανομείς») παρέχουν εγγύηση, υποκείμενη και σύμφωνα με τους όρους της παρούσας περιορισμένης εγγύησης (στο εξής «Εγγύηση»), στον αρχικό αγοραστή (στο εξής «Αρχικός Αγοραστής») ο οποίος αγόρασε το προϊόν που καθορίζεται στο παρόν έγγραφο (στο εξής «Προϊόν») από την EIZO ή τους Διανομείς, η οποία εξασφαλίζει ότι η EIZO και οι Διανομείς, σύμφωνα με τη διακριτή ευχέρειά τους, είτε θα επισκευάσου
ОГРАНИЧЕННАЯ ГАРАНТИЯ EIZO NANAO CORPORATION (называемая в дальнейшем “EIZO”) и авторизированные EIZO дистрибуторы (называемые в дальнейшем “Дистрибуторы”) гарантируют, в соответствии с условиями и пунктами этой ограниченной гарантии (называемой в дальнейшем “Гарантия”), первичному покупателю (называемому в дальнейшем “Первоначальный покупатель”), который приобрел у EIZO или Дистрибуторов продукт, указанный в этом документе (называемый в дальнейшем “Продукт”), что EIZO или Дистрибуторы на свое усмотрение л
有限责任保证书 EIZO NANAO有限公司（以下简称 EIZO ）和EIZO授权的经销商（以下简称 经销商 ），接受并依照本有限责任保证书（ 以下简称 保证书 ）之条款，向从EIZO和经销商购买本文中所规定产品（以下简称 产品 ）的原买方（以下称 原买方 ）提 供保证：在保证期内（规定如下），如果原买方发现(i)按本产品所附使用说明书（以下简称 用户手册 ）所述方式正常使 用本产品过程中，本产品出现故障或损坏；或(ii)按用户手册所述方式正常使用本产品过程中，本产品的液晶显示屏(LCD) 及亮度未能达到用户手册中所述的推荐亮度时，EIZO和经销商根据其独自的判断免费修理或更换该产品。 本保证期限定为本产品的使用时间在3万小时以下的条件下自购买本产品之日起的五（5）年（以下简称 保证期限 ），但 液晶显示屏（LCD）的保证期限定为自购买本产品之日起三（3）年的期间。仅当在用户手册中所述的推荐亮度条件下使 用本产品时，才保证本产品的亮度，亮度的保证期限定为本产品的使用时间在1万小时以下的条件下自购买本产品之日起 三(3)年。EIZO和经销商将不向原买方或任何第三方承担本保证书所规定之外的与本产品有关任何责任或义
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」，适用于在中华人民共和国销售的电子信息产品。标识中央的数字为 环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项，在自制造日起算的年限内，不会产生对环境污 染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 印刷电路板 机箱 液晶显示器 其他 ○： ×： 铅 （Pb） × ○ × × 汞 （Hg） ○ ○ × ○ 有毒有害物质或元素 镉 六价铬 （Cd） （Cr（VI）） ○ ○ ○ ○ ○ ○ ○ ○ 多溴联苯 （PBB） ○ ○ ○ ○ 多溴二苯醚 （PBDE） ○ ○ ○ ○ 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006规定的限量要求以下。 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006规定的限量要求。(企业可在此处,根据实际情況对上 表中打“×”的技术原因进行进一步说明) 41
