Important Please read this User’s Manual carefully to familiarize yourself with safe and effective usage. Please retain this manual for future reference. Wichtig Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, um sich mit dem sicheren und rationellen Betrieb dieses Produkts vertraut zu machen. Bewahren Sie das vorliegende Handbuch zu Referenzzwecken auf. Important Veuillez lire attentivement ce manuel d’utilisation pour utiliser pleinement votre appareil en toute sécurité.
For U.S.A, Canada, etc. (rated 100-120 Vac) Only This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
SAFETY SYMBOLS This manual and this product use the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Indicates an attention to be required. For example, the symbol “the risk of electric shock”. Indicates a prohibited action.
PRECAUTIONS IMPORTANT • To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit (refer to the figure below). [Location of Caution Statement] WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage.
WARNING Use the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. • Do not place outdoors. • Do not place in a transportation system (ship, aircraft, train, automobile, etc.) where it may be affected by strong vibration or shock. • Do not place in a dusty or humid environment. • Do not place in a location where water is splashed on the screen (bathroom, kitchen, etc.). • Do not place in a location where the steam comes directly on the screen.
WARNING Handle the batteries for the remote control with care. Not doing so may result in battery explosion, liquid leakage, or burns. • Do not disassemble, heat, short-circuit, or immerse the provided batteries in water. • Install/change batteries in a correct way. • When replacing batteries, use ones of the same type and model. • When replacing batteries, replace all of them at the same time with new batteries of the same brand and type.
CAUTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. • Do not place any objects on the ventilation slots.
Notice for this monitor This product is suited for displaying surveillance camera images. This product has been adjusted specifically for use in the region to which it was originally shipped. If the product is used outside the region, it may not operate as specified in the specifications. This product may not be covered by warranty for uses other than those described in this manual. The specifications specified in this manual are only applicable to signal cables specified by US.
Cleaning ATTENTION • Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage the cabinet or panel. NOTE • Optional ScreenCleaner is recommended for cleaning the panel surface. ● Panel • Clean the panel with a soft cloth such as cotton cloth or lens cleaning paper. • If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance its cleaning power.
CONTENTS Cover . ............................................................ 1 PRECAUTIONS.................................................. 3 Notice for this monitor.............................................. 7 CONTENTS.............................................................. 9 Chapter 1 Introduction...................................... 10 1-1. Features..............................................................10 1-2. Package Contents..............................................10 1-3.
Chapter 1 Introduction Thank you very much for choosing an EIZO color LCD monitor. 1-1. Features • 19-inch screen • SXGA (1280 × 1024) display compliant • Analog signal support PC signal: D-Sub mini 15-pin connector × 1 - Horizontal scan frequency 24.8 kHz - 74.8 kHz - Vertical scan frequency 56.2 Hz - 75.
1-3. Controls and Functions Monitor 15 14 13 1 2 3 4 5 6 7 8 9 10 1 Remote control detector Receives the signal from the remote control. 2 Displays the volume adjustment menu to volume up or down. 3 4 button button button 5 button 6 button 1112 • Displays/Exits the OSD menu. • Pressing the button while the OSD menu is displayed returns you to the previous menu status. • Used to: select the OSD menu tab; select the set value; or to increase/ decrease the adjustment value.
Remote Control 1 POWER 1 2 2 4 5 3 6 8 3 4 5 7 6 7 8 Turns the power on or off. PC Switches to PC input. INPUT SELECT VIDEO Switches to video input. Displays the volume adjustment menu to volume up or VOLUME down. • Displays/Exits the OSD menu. MENU • Pressing the button while the OSD menu is displayed returns you to the previous menu status. Pressing the button while the menu is displayed RETURN returns you to the previous menu status.
Chapter 2 Connecting Cables 2-1. Connection Procedures 1 Connects to external equipment compatible with the monitor. • When used as a PC monitor..................................................... page 13 • When using video equipment...................................................
(1) Connect the monitor to the PC with a signal cable that matches the connectors. After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.
2 Plug the power cord of the monitor into a power outlet. Plug the power cord into a power outlet and the Power connector on the monitor. ATTENTION • For the maximum power saving, it is recommended that the Power button be turned off. Unplugging the power cord completely shuts off power supply to the monitor. 2-2. Adjusting the Screen Height and Angle Hold left and right edge of the monitor with both hands, and adjust the screen height, tilt and swivel the screen to the best condition for working.
Chapter 3 Settings and Adjustments Setting and adjustment of the monitor can be performed using the Quick-OSD menu or OSD menu. The Quick-OSD menu enables easy operation of frequently used functions in the OSD menu. 3-1. Using Quick-OSD menu Basic operation of Quick-OSD menu 1 Displaying Quick-OSD Menu ■ The buttons on the monitor Press . ■ The remote control , Press 2 , or . Setting/Adjusting ■ The buttons on the monitor Use to select the set/adjustment items.
Functions The adjustable settings in the Quick-OSD menu are shown below. The availability of items depends on the input signal. √ : Configurable Setting / adjustable item PC Video √ Adjusts the brightness. ― : Not configurable Setting / adjustable content Brightness 0 to 100 √ Contrast 0 to 100 √ √ Adjusts the contrast. H Position 0 to 100 √ ― Adjusts the display position (horizontal). V Position 0 to 100 √ ― Adjusts the display position (vertical).
3-2. Using OSD menu Basic operation of OSD menu 1 Displaying OSD menu ■ The buttons on the monitor Press . ■ The remote control . Press 2 Setting/Adjusting ■ The buttons on the monitor Use or Use to select the set/adjustment items. Then, use to select the menu tab and then press . or for setting/adjustment. ■ The remote control 3 Use or to select the menu tab and then press . Use or to select the set/adjustment items. Then, use or for setting/adjustment.
Functions The settings adjustable in the OSD menu are as shown below. The availability of items depends on the input signal. √ : Configurable Menu tab Picture Setting / adjustable item Video Setting / adjustable content Brightness 0 to 100 √ √ Adjusts the brightness. Contrast 0 to 100 √ Adjusts the contrast. Phase 0 to 100 √ √ ― √ ― Adjusts the frequency (clock). √ √ Adjusts the sharpness of the image outline.
Menu tab Setup PC Video Setting / adjustable content Backlight Setting / adjustable item 0 to 100 √ √ Adjusts the brightness of the backlight. DPMS On/Off √ √ Transparency 0 to 100 √ √ Switches the power saving setting (DPMS) on or off. The backlight turns off when the synchronized input signal is no longer detected. Adjusts the transparency of the background color for the OSD menu.
Chapter 4 Troubleshooting If a problem still remains after applying the suggested remedies, contact your local dealer. Common Problems 1. No picture • Power indicator does not light. • Power indicator lights orange. • Power indicator lights blue. 2. The screen is too bright or too dark. 3. No sound 4. Green/red/blue/white dots or defective dots remain on the screen. Interference patterns or pressure marks remain on the screen. Afterimages appear. 5. 6.
Chapter 5 Reference 5-1. How to Attach the Optional Arm An optional arm (or an optional stand) can be attached by removing the stand section. Please refer to our web site for the corresponding optional arm (or optional stand). http://www.eizo.com ATTENTION • When attaching an arm or stand, follow the instructions of their user’s manual. • When using another manufacturer’s arm or stand, confirm the following in advance and select one conforming to the VESA standard.
5-2. Specifications LCD Panel Size 19.0-inch (480 mm) TFT color LCD Surface treatment Anti-glare Surface hardness 3H Viewing angle Horizontal 170°, Vertical 170° (CR : 10 or more) Dot Pitch 0.294 mm Display Area (H × V) 376.32 mm × 301.06 mm Resolution 1280 dots × 1024 lines Max. Display Color Approx. 16.77 million colors PC input Horizontal Scan Frequency 24.8-74.8 kHz Vertical Scan Frequency 56.2-75.1 Hz Max.
Main default settings (factory settings) Function PC input Video input Volume 45 Brightness 50 Contrast 50 40 Sharpness 7 Image Size Fill All Color ― 60 Tint ― 50 Backlight 100 DPMS On OSD Settings Transparency 50 OSD Timeout 45 Mode Light Up View Off Source Scan On Video Aspect Normal Language English Outside Dimensions unit : mm (inch) 38.5 (1.52) 61.5(2.42) 374(14.7) 172(6.8) 35° SWIVEL 35° 226(8.9) 30° TILT 239(9.4) 320(12.6) 405(15.9) 378.4(14.9) 13.3(0.
5-3. Preset Timing The following table shows factory preset analog signal timing: ATTENTION • Display position may be deviated depending on the PC connected, which may require screen adjustment using Setting menu. • If a signal other than those listed in the table is input, adjust the screen using the Setting menu. However, screen display may still be incorrect even after the adjustment.
LIMITED WARRANTY EIZO NANAO CORPORATION (hereinafter referred to as “EIZO”) and distributors authorized by EIZO (hereinafter referred to as the “Distributors”) warrant, subject to and in accordance with the terms of this limited warranty (hereinafter referred to as the “Warranty”), to the original purchaser (hereinafter referred to as the “Original Purchaser”) who purchased the product specified in this document (hereinafter referred to as the “Product”) from EIZO or Distributors, that EIZO and Distributors
关于电子信息产品污染控制标识 本标识根据「电子信息产品污染控制管理办法」,适用于在中华人民共和国销售的电子信息产品。标识中央的 数字为环保使用期限的年数。只要您遵守该产品相关的安全及使用注意事项,在自制造日起算的年限内,不会 产生对环境污染或人体及财产的影响。上述标识粘贴在机器背面。 • 有毒有害物质或元素的名称及含量 部件名称 有毒有害物质或元素 铅 汞 镉 六 价 铬多 溴 联 苯多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 × ○ ○ ○ ○ ○ 机箱 ○ ○ ○ ○ ○ ○ 液晶显示器 × × ○ ○ ○ ○ 其他 × ○ ○ ○ ○ ○ ○ :表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 规定的限量要求以下。 × :表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 规定的限量要求。 ( 企业可在此处 , 根据实际情況对上表中打“×” 的技术原因进行进一步说明 )
EIZO NANAO CORPORATION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax: +81 76 277 6793 EIZO Nordic AB Lovangsvagen 14 194 61, Upplands Väsby, Sweden Phone: +46 8 594 105 00 Fax: +46 8 590 91 575 中国苏州市苏州工业园区展业路8号中新科技工业坊5B Phone: +86 512 6252 0100 Fax: +86 512 6252 1508 http://www.eizo.com 2nd Edition-August, 2011 Printed in Japan. 00N0L652B1 (U.