User`s manual

English

[Connection Preference]

[

Baud Rate].........................Set the data transmission rate from 110 to 115,200.

[

Data Bits]...........................Set the data bits.

[

Parity]................................Set to check the data’s appropriate transmission.

[

Stop Bits] ...........................Set the length of the Stop Bits.

[

Flow Control]....................Set Flow Control.

[Call Option] tab

[

Cancel the call if not connected within]

...................................Click the box and type the interval to the right box

before canceling the connection in case of connection

failure.

[

Wait for dial tone before dialing]

...................................Click to dial after dial tone.

[Wait for credit card

tone]

...................................Click to set the intervals before canceling the

connection using a credit card.

[

Extra Settings (Special modem commands may be inserted into the dial strings)]

...................................Enter a special modem command if needed.

Click [OK] on [Device Properties] when finished. The dialog box saves the settings

and closes.

• Click the [Close] button to cancel the settings.

NOTE

• When changing settings in the [Device Properties], click the [Call Option] tab

before clicking [OK] to close the window.

Click [

Next>].

4. ADDING & CHANGING A CONNETION NAME