User`s manual

English

6-4. Network Settings

Click [Network] tab to set network information for the 630L.

NOTE

• All settings shown here are previously adjusted on the “WBT Setup Wizard”.

• Please set the properties depending on the 630L connection settings.

[Use

PPP connection or another network adapter]

...................................Click to use a modem connection to the WTS.

To connect to the WTS with a LAN network, set the following.

[

Obtain an IP address from a DHCP server]

...................................This allows the user to receive IP information from a

DHCP service automatically. The DHCP service of a

server must be in operation to receive the information.

[Spe

cify an IP address.] .......If not using a DHCP service, please select this and

enter the information shown below.

[

IP address] .........................Type the 630L IP address.

ubnet Mask].....................Type the subnet mask.

[

Gateway] ...........................Type the Gateway IP address.

[Terminal

Name] ................Type a name to recognize this unit from others on the

network. (Only in use of the RDP protocol)

[

Media Type] ......................Set up the transmission speed on the network.

6. USING THE TERMINAL PROPERTIES