User`s manual

English

Modifying the settings

This enables to delete printer settings when a printer is connected to the LPT1 port or

COM1 port.

1. Select LPT1 or COM1, and then click [Properties...].

2. “Printer Properties” dialog box is displayed.

Change the settings as needed.

[

Friendly Name]..................Changes the printer's name. (If you are naming the

printer, the name combination must be 31 character or

less.)

• When your printer is listed

[

Manufactures] / [Printers]

...................................Select the manufacturer and model of your printer.

• When your printer is not listed

[User Defined].....................Click the check box.

[Model Name] ....................Type the model and manufacturer of your printer.

[Make this the

default printer]

...................................Sets/cancels setting the printer as a default. (The 630L

corresponds to only LPT1 port, and only one printer

at a time can be installed. The installed printer will be

always the default printer.)

Click [OK] to return to the “Terminal Properties” dialog box.

Click [OK] in the “Terminal Properties” dialog box to save the settings and close the

“Terminal Properties” dialog box.

6. USING THE TERMINAL PROPERTIES