User`s manual

English

Date/Time Settings

Configure the date/time properties of the 630L.

NOTE

• The settings are referred when the client time zone function of the ICA protocol is

effective.

• Date and time will return to the default settings if the power cord is unplugged.

1. Double-click the “Date/Time” icon.

2. “Date/Time Properties” is displayed.

[Date/Time] Tab .................Set date, current time, or time zone. During daylight

saving time, click the [Daylight savings time currently

in effect] check box.

[NTP Server] Tab................Synchronize time with the NTP Server.

Select when to synchronize time with the NTP server

(on every boot up or every time clicking the

[Synchronize] button.)

NOTE

• Synchronizing time at startup is effective when the 630L is connecting

WTS/Web Server using a network connector on the rear.

• Getting the NTP Server information from the DHCP Server needs to satisfy the

following:

* Connect the WTS/Web Server by the network connector on the rear

* Use the DHCP Server to get information such as IP address.

* Set the NTP Server option at the DHCP Server.

Click [OK] to return to the “Terminal Properties” dialog box.

Click [OK] of the “Terminal Properties” to close the “Terminal Properties” and save the

settings.

6. USING THE TERMINAL PROPERTIES