Nanao Monitor User's Manual L465

English

2. CABLE CONNECTION

2-2. Connecting the signal cable

NOTE

• Be sure that the power switches of both the PC and the monitor are OFF.

1. Plug the signal cable into the connector at the rear of the monitor

and the other end of the cable into the video connector on the PC.

After connecting, secure the connection with the screw-in fasteners.

Analog Input

Signal Cable (enclosed)

Video Output

Connector D-Sub

mini 15 pin

• Standard graphics card

• Macintosh G3 (Blue & White) /

Signal Cable (enclosed) +

Adapter

Video Output

Connector D-Sub

15 pin

• Macintosh

Macintosh Adapter (Optional)

Digital Input

FD-C04 (Optional)

Video Output

Connector DVI-I

Digital Graphics card

FD-C04 (Optional)

NOTE

• The L465 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple

Display Connector).

Power Cord