User`s manual

32
Chapter3SettingMonitor
3-3. Switching Viewing Angle (EV2316W / EV2416W
only)
The viewing angle is adjusted so that the screen looks like a front view when the screen is looked up.
-40˚
-20˚
Off
Adjustable range
-40˚, -20˚, Off
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “Up View” in the “Monitor Settings” menu, and press
.
The “Up View” menu appears.
3. Select “-40˚”, “-20˚”, or “Off” with or .
4. Press
to exit.
Attention
• The setting is turned “Off” in the following cases:
- “Orientation” of the Setting menu is set to “Portrait”.
- “sRGB” is selected from the FineContrast mode.
• Depending on the viewing angle, switching the setting may make the screen less visible.
3-4. Enabling / Disabling DDC/CI communication
This function allows you to enable / disable the DDC/CI communication (see “6-9. Glossary” (page 65)).
Procedure
1. Choose “Monitor Settings” in the Setting menu, and press
.
2. Choose “DDC/CI” in the “Monitor Settings” menu, and press
.
The “DDC/CI” menu appears.
3. Select “On” or “Off” with or .
4. Press
to exit.
Note
• DisplayPort input does not support DDC/CI communication.